Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Pompano Beach?
Walk-in shower installation in Pompano Beach, FL typically costs between $4,500 and $12,000, with most homeowners landing somewhere around $6,500 to $8,000 for a mid-range build using quality tile and a frameless glass enclosure. The final number depends on the size of the space, whether you’re converting an existing tub surround or starting fresh, and which materials you choose for tile, fixtures, and glass.
If you want a written price before anyone touches your bathroom, Walk-In Shower Installation in Pompano Beach by Rowan Construction Group is quoted with a flat number and a written scope – no “call for a quote” placeholder, no ballpark that shifts when the crew shows up. That’s been the standard here since 2007.
Walk-In Shower Installation Cost Breakdown (2026)
Walk-in shower installation in Pompano Beach runs $4,500 to $12,000. The table below breaks that range into its actual components so you can see where the money goes and where you have real choices.
| Cost Component | Low End | High End | Notes |
|---|---|---|---|
| Demo and haul-away | $350 | $900 | Higher when removing a cast-iron tub or multiple tile layers |
| Waterproofing membrane | $400 | $900 | Schluter Kerdi and RedGard are the systems we spec most often; membrane and tape together |
| Shower pan / linear drain | $300 | $1,100 | Prefab acrylic pans at the low end; custom mortar bed with a linear Schluter drain at the high end |
| Tile (material and labor) | $1,200 | $4,500 | 12×24 ceramic on the floor and field walls vs. large-format porcelain slab or natural stone with a full-height niche |
| Glass enclosure | $900 | $2,800 | Semi-frameless door at the low end; frameless 3/8″ or 1/2″ tempered glass panel with a custom header at the high end |
| Fixtures and valve | $350 | $1,200 | Moen Align or Delta Vero trim kits mid-range; Kohler DTV or Hansgrohe thermostatic systems at the top |
| Built-in niche, bench, or grab bar | $150 | $700 | Each feature priced separately; grab bar blocking should be done at rough-in if there’s any chance you’ll want one later |
| Permit (Broward County) | $150 | $400 | Required for plumbing relocations; Pompano Beach building department processes most residential permits within 5 to 10 business days |
| Total – typical range | $4,500 | $12,000 | Mid-range build (tile, frameless glass, quality fixtures) lands around $6,500-$8,000 |
Where the Price Moves
The single biggest cost variable in Pompano Beach is almost always the tile package. A homeowner who picks a porcelain 4×12 subway tile at $3.50 per square foot and a 12×12 floor tile keeps material costs manageable. The same homeowner who falls in love with a book-matched porcelain slab at $14 per square foot – and plenty of our customers in the Cypress Bend and Palm Aire neighborhoods do – can add $2,000 to $3,000 to the tile line alone before labor even factors in.
Glass enclosure style is the second-biggest swing. A semi-frameless single pivot door runs $900 to $1,300 installed. A full frameless system with a fixed panel and a custom header cut to fit an irregular wall – which is common in the older split-level homes in Lighthouse Point just north of Pompano Beach – runs $2,000 to $2,800. The difference is real, and it shows.
Plumbing relocation changes the math entirely. If you’re converting a tub-to-shower and the drain is in the wrong spot, or you want to move the valve from one wall to another, you’re adding a plumbing rough-in to the job. In Pompano Beach’s older concrete slab homes – built in the 1960s and 1970s across neighborhoods like Cresthaven and Garden Isles – cutting and patching a concrete slab costs $400 to $800 more than the same work in a frame-floor home. That’s a Pompano Beach-specific cost that doesn’t always show up in national price guides.
Waterproofing is not where to save money in South Florida. Humidity stays above 70% for most of the year in Pompano Beach, and the cost of a failed shower membrane – tile lifting, drywall rot, mold remediation – runs several times the cost of doing it right the first time. Every Rowan shower build uses a sheet-applied or liquid waterproofing membrane behind the tile, and that line item stays in the quote regardless of the rest of the scope.
What Affects Walk-In Shower Installation Pricing in Pompano Beach
- Shower size and configuration. A 36×36-inch prefab-style shower costs far less to tile and enclose than a 60×36 walk-in with a return wall. Larger showers require more tile, more glass, and more waterproofing material – all priced by the square foot. Pompano Beach bathrooms in the city’s mid-century condo stock (Pompano Beach Club area, for example) often have unusually tight footprints, which can actually reduce material cost but increase labor time when setting tile in a confined space.
- Tub removal vs. existing shower replacement. If you’re pulling out a tub to build the shower, demo costs run $350 to $900 depending on tub type and how the surround was installed. A full replacement of an existing shower – where the pan, walls, and glass all come out but the footprint and drain location stay the same – is typically faster and less expensive than a conversion. Rowan’s home page covers the full trade range for context on how bathroom remodeling fits into a broader project.
- Tile material and pattern complexity. Large-format tiles (24×48 or bigger) require a flatter, more precisely leveled substrate – which adds labor time. Herringbone or diagonal patterns require more cuts and more waste material, typically 15% to 20% overage versus 10% for a standard running bond. Natural stone – travertine, marble, slate – requires sealing and is more prone to cracking on an imperfect surface, so the prep work that goes under it costs more than prep for porcelain.
- Glass enclosure style and custom sizing. Standard shower door openings (typically 28 to 32 inches) accommodate stock or semi-custom glass at reasonable prices. Non-standard openings – and many Pompano Beach homes have them because previous owners made creative choices – require custom-cut tempered glass, which adds 3 to 6 weeks of lead time and $400 to $800 to the glass line item.
- Plumbing scope and slab conditions. Pompano Beach sits on a limestone shelf with a high water table. Concrete slab construction is the norm across most of the city, and cutting that slab to relocate a drain adds real cost and real time. If your existing valve is in good shape and the drain is where you need it, you’re in a much simpler project. If either needs to move, plan for the additional scope and get the permit – Broward County requires it, and a licensed plumber needs to sign off.
- Accessibility features. A curbless (zero-threshold) shower entry, grab bar blocking built into the walls, a fold-down teak bench, or a handheld shower head on a slide bar – each adds between $150 and $700 depending on the feature. These are worth discussing up front rather than retrofitting later, because blocking for a grab bar costs almost nothing when it’s done during rough-in and $300 to $500 when you come back to do it after the tile is set.
Before
AfterHow to Save on Walk-In Shower Installation in Pompano Beach
The most reliable way to save money on a walk-in shower in Pompano Beach is to keep the drain in the same location. That single decision eliminates the plumbing rough-in cost, the potential slab-cut cost, and in most cases the permit fee. If your current drain works and is positioned reasonably, design around it.
Choose your tile package before you talk to a contractor, not after. Tile showrooms in the Pompano Beach and Deerfield Beach area carry a wide range of options, and you’ll make a better decision when you’re not under any time pressure. Porcelain that reads like concrete or natural stone – available from Emser, MSI, and Florida Tile – costs a fraction of the real thing, installs faster because it’s more dimensionally consistent, and performs better in a wet environment. You can get a genuinely good-looking shower in the $6,500 to $7,500 range if you’re intentional about the tile choice rather than reactive.
Consider a semi-frameless door rather than a fully frameless system if budget is a priority. The visual difference is meaningful but not dramatic, and the cost difference – typically $600 to $1,200 – is real. A single pivot door with a slim chrome frame reads as clean and modern; it just doesn’t have the glass-only look of a full frameless system.
Ask about fixture packages. Rowan sources from a broad base of vetted brands, and there are legitimate Kohler and Moen options in the $400 to $700 installed range that perform as well as fixtures twice the price. The valve body matters more than the trim kit – a quality pressure-balancing valve behind the wall with a mid-range trim is a smarter spend than an entry-level valve dressed up with expensive trim.
Get a second opinion on any written estimate you already have. Rowan’s Free Second Opinion offer means Grant Rowan will review a competitor’s line-item quote at no charge and show you exactly where the numbers come from. That’s not a sales tactic; it’s the kind of review that occasionally reveals a $1,500 discrepancy in the glass line or a waterproofing spec that doesn’t match what South Florida humidity actually requires. Call (754) 714-6540 to schedule it.
Finally, don’t skip the permit when one is required. Unpermitted bathroom work in Pompano Beach creates real problems at resale – Broward County requires disclosure, and buyers’ inspectors flag it. The permit fee ($150 to $400) is a minor line item against the total project cost and protects the work for the long term.
Walk-In Shower Cost vs. Related Projects in Pompano Beach
It helps to see where walk-in shower installation sits relative to the broader bathroom remodeling cost range in Pompano Beach. A full bathroom remodel – covering tile, fixtures, vanity, toilet, and shower together – runs $9,000 to $28,000. A smaller bathroom remodel focused on cosmetic updates rather than a full gut runs $5,000 to $12,000. Walk-in shower installation at $4,500 to $12,000 overlaps that range because it’s often the most labor-intensive single element of a bathroom renovation.
If you’re deciding between a tub-to-shower conversion and a full shower replacement, the conversion (pulling out a tub and building a shower in that footprint) runs $3,500 to $10,000, depending on how much plumbing relocation is involved. A straight shower replacement – same footprint, new tile and glass – comes in at $3,000 to $8,500. A new walk-in shower installation, which often involves more custom work and a larger format, sits at the top of that ladder at $4,500 to $12,000.
A bathroom vanity installation – if you’re adding that to the same project – runs $800 to $3,000. Combining trades in a single mobilization saves on setup and supervision time and is worth discussing when you’re scoping the project.
What Rowan Construction Group Does Differently
Grant Rowan started Rowan Construction Group in 2007 with a straightforward rule: the price is written before anyone picks up a tool. Across 4,000-plus projects since then, that rule has stayed in place. The written quote includes the scope, the spec, and the warranty. Nothing changes without a signed change order – no verbal agreements, no “we’ll figure it out on site.” That discipline is the reason Rowan projects finish within a few percent of the agreed price.
Every walk-in shower installation in Pompano Beach includes a documented photo record at each visit stage – substrate condition before waterproofing, membrane installation, mud bed or pan, tile progress, final glass and fixture. The customer receives this record as a standard deliverable, not an add-on. It’s evidence of what was found and what was done, and it matters if you ever sell the home or need to reference the work years later.
The 365-Day Done Right Promise is printed on every Rowan contract under The Haven Standard. If something isn’t right within a year of completion, Rowan makes it right – not as a favor, but as a written contractual obligation. That’s a different level of commitment than a handshake warranty from a crew that may not be in business next year.
Crews are background-checked and uniformed. A live person answers calls 24/7. And the fixture and material sourcing covers more than 50 vetted brands – Kohler and Moen for fixtures, Schluter for waterproofing and shower systems, Emser and MSI for tile, Frameless hardware from recognized manufacturers – so the quote reflects actual market pricing rather than inflated numbers built on a thin vendor relationship.
Key Takeaways
- Walk-in shower installation in Pompano Beach costs $4,500 to $12,000, with a typical mid-range build landing around $6,500 to $8,000.
- The biggest cost variables are tile material, glass enclosure style, and whether plumbing relocation is required.
- Pompano Beach’s concrete slab construction means drain relocation costs more here than in frame-floor markets – plan for $400 to $800 extra if the drain needs to move.
- Waterproofing is not a line item to cut in South Florida’s humidity; a proper membrane spec protects the tile, the substrate, and the home.
- Broward County permits are required for plumbing work; the cost is $150 to $400 and protects the work at resale.
- Rowan’s written price, signed change-order discipline, and 365-Day Done Right Promise are in the contract before anyone starts – not offered after the fact.
FAQs – Walk-In Shower Installation Cost in Pompano Beach
How much does a walk-in shower installation cost in Pompano Beach, FL?
Walk-in shower installation in Pompano Beach costs between $4,500 and $12,000 for most residential projects in 2026. A basic build with prefab pan, ceramic tile, and a semi-frameless door lands in the $4,500 to $6,000 range. A mid-range project with large-format porcelain, a custom mortar bed, and a frameless glass enclosure runs $6,500 to $8,500. High-end builds with natural stone, thermostatic Kohler or Hansgrohe fixtures, and custom glass panels reach $10,000 to $12,000. Call (754) 714-6540 for a written price specific to your bathroom – estimates are free.
How long does walk-in shower installation take in Pompano Beach?
Most walk-in shower installations in Pompano Beach take 5 to 10 business days from demo to final fixture connection, assuming no significant plumbing relocation and materials are on-hand before work starts. Tile-heavy builds with large-format porcelain or stone require more set time between layers – mortar needs to cure, and grout follows the tile. Custom glass enclosures add lead time: most fabricators serving the Pompano Beach and Fort Lauderdale market deliver custom-cut tempered glass in 3 to 6 weeks, so glass is typically ordered well before demo begins.
Do I need a permit for a walk-in shower installation in Pompano Beach?
A permit is required in Pompano Beach any time the plumbing scope changes – drain relocation, valve replacement, new supply lines, or adding a showerhead that didn’t exist before. If you’re doing a direct tile-and-glass replacement on an existing footprint with no plumbing changes, a permit may not be required, but that determination is made by the Broward County building department, not the contractor. Permit fees in Pompano Beach typically run $150 to $400 for residential bathroom work. Rowan pulls permits as part of the written scope when they’re required; no work starts until the permit is in hand.
Is it cheaper to repair or replace a walk-in shower?
It depends on the condition of the waterproofing membrane behind the tile. If grout is cracking and caulk lines are failing but the membrane is intact and the pan has no leaks, a repair and regrout can run $400 to $1,200 and buy years of service. If water has penetrated the membrane – signaled by soft drywall, musty smell, or tiles that flex underfoot – repair becomes incomplete without pulling the tile and redoing the waterproofing. At that point, a full shower replacement at $3,000 to $8,500 often costs less in the long run than partial repairs that come back in 18 months. A Rowan site visit includes a documented assessment of what’s actually there before any recommendation is made. Call (754) 714-6540 to set that up.
What’s the difference between a walk-in shower and a tub-to-shower conversion in Pompano Beach?
A tub-to-shower conversion uses the existing tub footprint – typically 30×60 inches – and builds a shower where the tub was. Costs run $3,500 to $10,000 depending on plumbing relocation and finishes. A walk-in shower installation may involve a different footprint, a custom-sized space, or a curbless entry that requires more precise slope work on the floor. Walk-in builds tend to run slightly higher ($4,500 to $12,000) because the custom size and entry configuration add labor. In practice, the right choice depends on how your bathroom is laid out – a conversion saves money when the tub location is ideal for a shower; a new walk-in build is worth the additional cost when you want a different configuration entirely.
Pricing reflects the Pompano Beach market as of 2026. Rowan Construction Group Pompano Beach offers free estimates – call (754) 714-6540.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Pompano Beach since 2007.
What Our Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Solid work, decent crew, and the site was left tidy every evening."
- Pearl A."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T.