Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Pompano Beach?
Metal roof installation in Pompano Beach typically costs between $15,000 and $40,000 for a full residential installation, depending on roof size, panel profile, and the material selected. Most single-family homes in Pompano Beach land between $18,000 and $32,000 once labor, underlayment, and permitting are factored in. That range is wider than it looks on paper – read through the breakdown below and you’ll see exactly which variables move the number in either direction.
Metal Roof Installation Cost Breakdown (2026)
The table below reflects what Rowan Construction Group quotes for metal roof installations in Pompano Beach as of 2026. Every line item here appears on the written scope before any crew arrives – under Clause 1 of the Haven Standard, the price is locked before anyone picks up a tool.
| Cost Component | Typical Range (Pompano Beach) | Notes |
|---|---|---|
| Steel Standing Seam Panels | $7,500 – $14,000 | 26-gauge steel; most common in coastal installs |
| Aluminum Standing Seam Panels | $9,000 – $18,000 | Preferred for salt-air environments; lighter than steel |
| Exposed Fastener Metal Panels | $5,500 – $11,000 | Lower upfront cost; requires periodic fastener inspection |
| Labor (removal + installation) | $4,000 – $9,500 | Varies with pitch, access, and layer count below |
| Tear-off of Existing Roofing | $1,200 – $3,500 | Florida code typically limits roofing layers to two |
| High-temp Peel-and-Stick Underlayment | $800 – $2,200 | Required under metal panels per Broward County code |
| Permit and Inspection Fees | $400 – $1,200 | Broward County Building Department schedule; varies by project value |
| Fascia and Soffit Repairs | $500 – $2,500 | Common on homes built before 1995 in Pompano Beach |
| Flashing and Ridge Caps | $600 – $1,800 | Custom-fabricated on site; aluminum preferred near the coast |
| Gutters (if replaced at same time) | $900 – $2,800 | Optional but often makes sense when panels are already off |
What the Total Range Actually Means
A 1,500-square-foot ranch-style home in the Cresthaven or Palm-Aire area with a low-pitch hip roof and a single layer of asphalt shingles underneath tends to come in at the lower end – around $17,000 to $22,000 for aluminum standing seam. A two-story home on the barrier island side of Pompano Beach with a steeper pitch, two existing shingle layers to tear off, and damaged fascia boards below the roofline can push past $35,000 without any surprises. The difference isn’t markup – it’s square footage, access complexity, and what the decking reveals once the old roof is stripped.
Compared to a standard Metal Roof Installation in Pompano Beach quote you’d get from a supply-and-install roofer, Rowan’s written scope breaks every line out separately so you can see what you’re paying for. That discipline – no lump-sum, no “we’ll figure it out as we go” – is the same one that has kept 4,000-plus projects within a few percent of the agreed number since 2007.
What Affects Metal Roof Installation Pricing in Pompano Beach
Six factors move the number more than anything else on a Pompano Beach metal roof install. None of them are negotiable in the way a retail price is, but understanding them lets you compare quotes honestly.
- Panel material and profile: Aluminum standing seam costs roughly 20 to 30 percent more than galvanized steel per square foot, but it’s the right call within a mile of the Intracoastal. Salt-laden air accelerates oxidation on steel panels, especially on homes east of Federal Highway. For properties in Lighthouse Point-adjacent neighborhoods or along Hillsboro Beach, aluminum’s corrosion resistance is a functional specification, not an upgrade.
- Roof size and pitch: Roofing is priced per square (100 square feet). A steeper pitch – anything above a 6:12 – requires safety rigging, longer installation time, and more fastener points per panel. Hip roofs, which are the dominant design in Pompano Beach’s mid-century housing stock, create more cut edges and waste than simple gable roofs, adding 8 to 15 percent to material cost.
- Layer count and decking condition: Florida’s building code generally prohibits more than two roofing layers. Homes in the Collier City or Pompano Highlands areas built in the late 1960s and 1970s sometimes have two asphalt shingle layers over original wood decking. Full tear-off of both layers plus decking repair before metal panels go down adds $2,000 to $5,000 to the project depending on the extent of rot or delamination found.
- Wind and impact requirements: Broward County’s building code enforces Florida Building Code Section 1504 wind uplift requirements – this is not optional. Standing seam panels with concealed fasteners and proper clip spacing meet those requirements more readily than exposed-fastener systems. The permit inspection will verify clip spacing and underlayment coverage; if it doesn’t pass, the work has to be redone. Rowan’s documented photo record captures underlayment coverage and clip placement before panels are closed, so that inspection goes cleanly.
- Existing flashing and penetrations: Skylights, HVAC curbs, pipe boots, and chimney surrounds all require custom flashing fabricated and fitted to the new panel profile. Homes in the Cypress Hammock or Terramar neighborhoods with older skylights often need full skylight reframing when the surrounding deck is exposed. Budget $300 to $800 per penetration if these haven’t been addressed in the last ten years.
- Timing and material lead time: Aluminum standing seam panels in coastal-rated coil colors – Kynar 500 finishes in particular – carry a two-to-four-week lead time from South Florida distributors. Scheduling the permit inspection, material delivery, and crew window in the right sequence keeps the project on schedule. Jobs that start without a confirmed material date routinely run two to three weeks longer than quoted.
Before
AfterMetal Roofing Materials: Which Performs Best in Pompano Beach
Not every metal panel system is built for a coastal South Florida climate. Here’s how the main options compare when you’re putting them on a house within Broward County’s High-Velocity Hurricane Zone.
Aluminum Standing Seam
This is the panel system Rowan installs most often in Pompano Beach. Aluminum doesn’t rust, handles thermal expansion well in Florida’s heat cycles, and a Kynar 500 painted finish holds color for 30-plus years without recoating. It’s heavier on the budget upfront – expect $9,000 to $18,000 in material cost alone for a typical single-story home – but the maintenance cost over the next 40 years is close to zero if the install is clean and the flashing is detailed correctly.
Galvanized or Galvalume Steel Standing Seam
Steel standing seam costs less per panel than aluminum and performs well in non-coastal environments. In Pompano Beach specifically, the salt content in the air is high enough that we recommend it only on properties west of I-95, where the direct ocean influence is reduced. Even there, 26-gauge Galvalume with a full paint system is the minimum spec – thinner gauges or unpainted Galvalume show surface oxidation within five to eight years in Broward County conditions.
Exposed-Fastener Metal Panels (R-Panel, PBR Panel)
The least expensive metal option, often used on agricultural buildings and commercial warehouses. Some residential contractors offer it as an entry-level metal roof. It works, but the exposed screws require inspection every five to seven years – the neoprene washers under each head degrade in UV exposure and eventually allow water intrusion. For a home in Pompano Beach that’s already dealing with Florida’s UV index and wind-driven rain, a standing seam system with concealed fasteners is a better long-term choice. If budget is the deciding factor, this panel gets you a metal roof for $5,500 to $11,000 in materials.
Metal Tile and Shake Profiles
Stone-coated steel tile panels – brands like Decra are common in South Florida – give a tile appearance with lighter weight than concrete tile. They’re a reasonable choice for HOA-governed communities in Pompano Beach where the architectural style requires a tile look. Pricing runs $12,000 to $22,000 in materials for a standard home, and installation follows a batten-and-clip system that’s different from standing seam. Rowan sources these through vetted distributors and specs the install to Florida Product Approval requirements for Broward County wind zones.
Metal Roof vs. Other Roofing Options in Pompano Beach
The upfront number on a metal roof is real, and it’s higher than asphalt shingles. But comparing a $15,000 to $40,000 metal install against a $8,000 to $20,000 standard roof replacement isn’t a fair comparison unless you account for lifespan. An asphalt shingle roof in Pompano Beach’s climate – constant UV exposure, summer heat cycles that hit 180 degrees on the deck surface, and annual hurricane season stress – typically lasts 15 to 20 years. A properly installed aluminum standing seam roof lasts 40 to 50 years with minimal maintenance. Run those numbers across two roofing cycles and the metal roof costs less over time in most scenarios.
There’s also the insurance conversation. Many Florida carriers – and this is worth a call to your agent before the project – offer premium discounts for homes with rated metal roofing systems because of the superior wind uplift performance. That discount varies by carrier, but it’s real and it offsets part of the upfront cost difference annually.
The Permitting Reality in Pompano Beach
Broward County Building Department requires a permit for any roof replacement, including full metal roof installations. The permit application needs to include a Florida Product Approval number for the panel system and Florida Engineering Society documentation for the clip and fastener pattern. This is not paperwork for paperwork’s sake – it’s the documentation chain that confirms your roof was installed to the wind uplift standard that protects your home in a Category 2 or Category 3 storm.
Rowan pulls the permit, coordinates the inspection schedule, and provides the permit documentation as part of the project package. The Documented Photo Record – standard on every Rowan project, not an add-on – captures underlayment coverage, clip spacing, and panel seaming before the inspection walk so there are no surprises at the final review.
Be cautious of any contractor who suggests you skip the permit or who can’t provide Florida Product Approval numbers for the panels they’re proposing. An unpermitted metal roof in Pompano Beach creates a title problem when you sell and voids the manufacturer’s warranty on the panels. Neither outcome is worth the permit fee you saved.
How to Save on Metal Roof Installation in Pompano Beach
There are four legitimate ways to reduce your project cost without compromising on what matters. None of them involve cutting specs that affect performance in a hurricane zone.
- Get a second opinion on the existing quote you have. Rowan offers a free second opinion on any written estimate. Bring the competitor’s quote and Grant Rowan’s team will review it line by line at no charge. This isn’t a sales exercise – it’s a comparison of scope and material specs. A lower-priced quote that specifies 29-gauge exposed-fastener panels when your location warrants 26-gauge aluminum standing seam isn’t actually cheaper over five years.
- Combine the project with other exterior work. If your fascia boards need replacement or your gutters are at end of life, scheduling that work concurrently with the roof installation saves a mobilization cost. The crew and equipment are already on site; adding a fascia board run or gutter replacement to the scope doesn’t cost what it would as a standalone project.
- Choose steel over aluminum if you’re west of I-95. For homes in the Collier Manor, Cresthaven, or Pompano Highlands areas that aren’t in direct salt-air exposure, 26-gauge Galvalume standing seam performs well and costs 20 to 30 percent less in material than aluminum. The spec is still a standing seam system with concealed fasteners – you’re not trading down in installation quality.
- Avoid adding unnecessary penetrations. Every skylight, solar tube, or HVAC curb that breaks a metal roof plane is a potential leak point and adds cost in flashing labor. If a skylight is already leaking or cracked, the roof replacement is a good time to address it – but adding new penetrations to a freshly installed metal roof increases both installation cost and long-term maintenance points.
- Get the written price before you agree to anything. Under Clause 1 of the Haven Standard, Rowan delivers a written flat price with written scope before any work starts. No change proceeds without a signed change order. This is the single most effective cost-control mechanism available to you as a homeowner – because the projects that run over budget almost always do so because the initial scope was vague and changes were verbal.
For a no-obligation estimate with a written price on the same call, contact Rowan Construction Group Pompano Beach at (754) 714-6540. A live person answers that number 24 hours a day.
FAQs – Metal Roof Installation Cost in Pompano Beach
How much does metal roof installation cost in Pompano Beach?
Metal roof installation in Pompano Beach costs between $15,000 and $40,000 for most single-family homes, with the average project landing between $18,000 and $32,000. Aluminum standing seam on a 1,800-square-foot home with a clean deck runs around $22,000 to $28,000 fully permitted. Steel standing seam on the same home comes in at $17,000 to $23,000. Call (754) 714-6540 for a written estimate specific to your address and roof configuration.
Is a metal roof worth it in South Florida?
Yes, for most Pompano Beach homeowners it is. A properly installed aluminum standing seam roof lasts 40 to 50 years in this climate, compared to 15 to 20 years for asphalt shingles. Metal panels also meet Florida’s wind uplift requirements more consistently than shingle systems, and many Florida insurance carriers offer premium reductions for rated metal roofing. Over two asphalt shingle cycles, the metal roof typically costs the same or less while requiring almost no maintenance. The upfront cost is real; the long-term math usually favors metal in a coastal South Florida market.
How long does metal roof installation take in Pompano Beach?
Most residential metal roof installations in Pompano Beach take 3 to 7 business days from first-day tear-off to final inspection sign-off. The permit application adds 5 to 15 business days before physical work begins, depending on current Broward County Building Department review queue. Standing seam panel material lead time is typically 2 to 4 weeks if a specific Kynar color is ordered. Rowan coordinates permit, material delivery, and crew scheduling so those windows overlap rather than stack. Total calendar time from signed contract to final inspection is typically 4 to 6 weeks.
What’s the difference between standing seam and exposed-fastener metal roofing?
Standing seam panels interlock at raised seams with concealed clips, meaning no fastener is exposed to weather. Exposed-fastener panels (sometimes called R-panel or PBR panel) use screws driven through the face of the panel with neoprene washers to create the seal. Standing seam costs more upfront – roughly $3 to $6 per square foot more in installed cost – but has no weathering fasteners to inspect or replace. For homes in Pompano Beach within a few miles of the Intracoastal or the ocean, standing seam is the correct specification. Exposed-fastener panels are serviceable for inland properties where a lower initial cost is the priority.
Does Rowan Construction Group require a permit for metal roof installation in Pompano Beach?
Yes, always. Broward County requires a permit and inspection for every residential roof replacement, and Rowan pulls the permit as part of every project scope – it’s not an optional add-on. The permit package includes the Florida Product Approval documentation for the panel system and the wind uplift engineering. At project close, the customer receives the permit card and the documented photo record of the installation. Skipping the permit creates a title issue at resale and voids the panel manufacturer’s warranty; Rowan doesn’t offer unpermitted installation as an option.
Can Rowan match a lower quote from another contractor?
Rowan offers a free second opinion on any written estimate – bring the competitor’s quote and Grant Rowan’s team will compare it line by line at no charge. If the specs are identical and another contractor’s price is lower, Rowan will say so honestly. In practice, most price differences reflect a specification difference: gauge thickness, panel profile, underlayment spec, or whether the permit is included. Once the scope is equal, Rowan’s written pricing is competitive for the Pompano Beach market. Call (754) 714-6540 to set up the comparison review.
Key Takeaways
- Metal roof installation in Pompano Beach costs $15,000 to $40,000; most homes land between $18,000 and $32,000.
- Aluminum standing seam is the correct spec for homes near the Intracoastal or the Atlantic; steel standing seam works well for inland properties west of I-95.
- Broward County requires a permit for every roof replacement – budget $400 to $1,200 and account for the review period in your project timeline.
- A metal roof lasts 40 to 50 years in South Florida’s climate, compared to 15 to 20 for asphalt shingles – the long-term math usually favors metal for homeowners who plan to stay.
- Rowan delivers a written flat price before any work starts, pulls the permit, and provides a documented photo record at project close – no exceptions, on every project.
- The 365-Day Done Right Promise covers every installation: if it’s not right, Rowan makes it right.
- A free second opinion on any written estimate is a standing offer – bring your existing quote and Grant Rowan’s team will review it at no charge.
Rowan Construction Group Pompano Beach has delivered more than 4,000 projects with a written price before any work started and a documented record when the crew left. For a flat written estimate on metal roof installation at your Pompano Beach address, call (754) 714-6540. A live person answers around the clock, and the estimate costs nothing.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Pompano Beach since 2007.
Pricing reflects the Pompano Beach market as of 2026. Rowan Construction Group Pompano Beach offers free estimates – call (754) 714-6540.
What Our Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L.