Tremron Kitchen Remodeling Nationwide

Tremron Kitchen Remodeling: The Pompano Beach Owner’s Guide

Tremron kitchen remodeling in Pompano Beach runs $14,000-$45,000 for a full project, and we stock compatible cabinets, countertops, and hardware for same-day assessment. Most owners first realize something’s wrong when cabinet doors won’t stay aligned after a humid summer, or when drawer slides start sticking even after cleaning. In Pompano Beach’s salt-air climate, we’ve seen Tremron cabinet hinges corrode faster than inland installs by two to three years.

Call (754) 714-6540

Which Tremron Models This Applies To

Tremron manufactures semi-custom cabinetry under several lines that have circulated through South Florida since the early 2000s. The most common we encounter in Pompano Beach are the Tremron Classic Series (frameless construction, ¾-inch plywood box, soft-close upgrade available) and the Tremron Estate line (inset door, ½-inch overlay, hardwood face frame). To identify your series, check the hinge cup bore pattern: Classic uses a 35mm cup with three adjustment screws, Estate uses a 26mm cup with two screws and a different depth setting.

We also see Tremron contractor-grade installs from the 2008-2014 building boom, often labeled with a sticker inside the sink base rather than the door edge. These used a lighter-duty ½-inch particleboard box with thermofoil facing, and the drawer boxes were ⅜-inch melamine with epoxy-coated slides rated at 75 pounds. If your drawers are sagging or the bottom panel is bowed, that’s likely your series. We carry direct-fit replacement drawer boxes in 18-inch, 21-inch, and 24-inch widths, plus upgraded 100-pound-rated soft-close slides that fit the same side-mount holes.

OEM Tremron parts are no longer manufactured; the company shifted to commercial millwork in 2019. We source equivalent-grade components from our vetted supplier network, including KraftMaid hardware for hinge compatibility and Blum slide systems where the mounting pattern matches. Every replacement is measured on-site before ordering, because we’ve found three millimeters of variance between supposed “standard” 35mm bores across different Tremron production years.

Signs Your Tremron Kitchen Remodeling Is Failing

• Doors hang crooked or won’t close flush. The hinge cup has wallowed out in the plywood or particleboard, or the salt air has corroded the adjustment screw threads so they no longer hold position. In Pompano Beach, we see this first on doors facing east, where morning salt spray hits hardest.
• Drawers stick, bind, or require lifting to close. The epoxy coating on original Tremron slides has worn through, exposing steel to humidity. Once rust starts, the ball bearings seize within weeks. We stock replacement slides in 16-inch, 18-inch, and 22-inch lengths.
• Laminate countertop seams are lifting or discolored. The original adhesive failed due to thermal cycling, or the substrate swelled from a sink leak. Tremron used standard particleboard substrate in most lines; we replace with moisture-resistant MDF or upgrade to plywood.
• Sink base floor is soft or stained. Water has penetrated the particleboard box bottom. This is structural; a new floor panel cut from marine-grade plywood, sealed at edges, outlasts the original by years.
• Hardware finish is pitted or peeling. Original Tremron pulls and knobs were zinc alloy with plated finish. We stock solid stainless and brushed nickel equivalents that survive Pompano Beach’s humidity without the plating failure.

Before

After

Replacement Cost & What’s Included

What drives the range: box construction material (particleboard vs. plywood), door style and finish grade, hardware quality, and whether we’re working within existing footprint or moving plumbing and electrical. Every quote is flat price, written scope, signed before work starts. Under Clause 1 of The Haven Standard, the number you agree to is the number you pay; no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the workmanship, and you receive a documented photo record of every visit.

DIY or Call Us?

There’s honest work an owner can do: tighten a loose hinge screw with a Pozidriv #2 driver, or clean slide tracks with a dry cloth. But cabinet hinge boring requires a 35mm Forstner bit and a jig that costs more than our service call. Drawer slide replacement means fully extending the slide to reach the rear mount, which on a 24-inch deep base cabinet puts your hands in a blind corner with a power driver. We’ve retrieved more stripped screws from failed DIY attempts than we care to count.

Countertop removal involves disconnecting plumbing and often electrical; in Florida, that requires a licensed contractor for permit compliance. We pull permits, schedule inspections, and handle the documentation. Call (754) 714-6540 to schedule your free estimate. We’ll measure twice, say it once, show our work.

FAQs