Techo-Bloc Driveway & Pavers Nationwide

Techo-Bloc Driveway & Pavers: The Pompano Beach Owner’s Guide

Techo-Bloc driveway and paver repair in Pompano Beach typically runs $7,000-$18,000 for full replacement and $250-$700 for sealing, with most paver resets and edge-restraint repairs quoted same-day and scheduled within the week. We stock Techo-Bloc-compatible edge restraints, polymeric sands, and base-course materials on our Pompano Beach trucks, and we carry full series catalogs for matching discontinued colors and textures. Most homeowners notice the problem first as shifting along the driveway edges after heavy rain, or as individual pavers rocking underfoot where the bedding layer has washed out.

Call (754) 714-6540

Which Techo-Bloc Models This Applies To

Techo-Bloc organizes its residential hardscape lines by thickness, edge profile, and compression rating, and the part you need depends on which series was originally installed. The Blu 60mm and Blu Grande 80mm slabs, common in Pompano Beach’s newer construction near the Intracoastal, use a proprietary chamfer edge that standard 60mm restraint won’t seat properly. The Villagio and Antika tumbled series, popular in the older neighborhoods off Atlantic Boulevard for their Old Florida look, run 70mm and require a deeper edge-restraint channel. Check the paver underside for the Techo-Bloc stamp and a two-digit year code; pre-2018 Villagio used a slightly different aggregate mix that affects color matching.

We source OEM Techo-Bloc materials through their Southeast distribution center in Fort Pierce, and we also vet aftermarket polymeric sands and geotextiles that meet the same permeability and flexural-strength specs. For color-matched repairs, OEM is usually the safer call. For base-course and bedding sand, the aftermarket equivalent often performs identically at a lower line-item cost, which we note separately on the written quote.

Signs Your Techo-Bloc Driveway & Pavers Is Failing

• Individual pavers rock or sink when stepped on. This means the bedding sand layer has washed out or compacted unevenly, usually from poor initial screeding or water intrusion through failed edge restraint. The fix is lifting the affected pavers, re-screeding the bedding layer, and resetting with fresh joint sand.
• Gaps widening between pavers, especially after rain. Polymeric sand has degraded or was never properly installed; Florida’s UV exposure and salt air break down inferior jointing compounds in three to five years. We remove the old material and re-grout with Techo-Bloc-compatible polymeric sand rated for permeable installation.
• Edge pavers tilting outward or separating from the field. The plastic or aluminum edge restraint has cracked, rotted, or pulled its spikes. In Pompano Beach, the sandy substrate doesn’t hold spikes as well as clay soils up north, so we often upgrade to longer helical spikes or concrete-edge anchoring on resets.
• Efflorescence blooming across the surface. White mineral deposits indicate moisture moving through the paver body and carrying calcium to the surface. It’s usually cosmetic, but persistent efflorescence can signal a failed vapor barrier beneath the base course or improper drainage slope.
• Pooling water that didn’t used to collect. The original pitch has settled, often from base-course erosion or tree-root intrusion. In Pompano Beach’s flat terrain, even a quarter-inch of settlement creates visible ponding; we relevel with laser-guided screeding and restore the 1.5% minimum slope to drainage.

Before

After

Replacement Cost & What’s Included

The spread in full replacement pricing comes down to three factors: driveway square footage, whether the existing base course can be salvaged (sandy Pompano Beach soils often require full excavation), and the specific Techo-Bloc series selected. Blu Grande at 80mm costs more per square foot than standard Blu 60mm, and freight from Fort Pierce adds a line item we disclose upfront. Under Clause 1 of the Haven Standard, the written price you sign is the price you pay; no change order moves forward without your signature, which is how we’ve kept projects within a few percent of the agreed number across 4,000-plus jobs since 2007.

Our 365-Day Done Right Promise covers the workmanship on every paver installation. If settling, joint failure, or edge separation occurs within that window, we return and make it right at no charge.

DIY or Call Us?

There’s a honest line here, and we’ll draw it plainly. A homeowner can safely check whether pavers are loose by hand, verify edge-restraint spike tightness with a screwdriver, and photograph efflorescence or cracking for comparison. What we don’t recommend is lifting and resetting pavers yourself, especially on driveways that bear vehicle loads. The bedding layer must be screeded to exact thickness (typically 1 inch of coarse concrete sand) and compacted in lifts; get it wrong and the pavers settle again in months. Edge restraint in sandy Florida soils requires proper spike depth and spacing, or concrete haunching in high-load areas, to resist lateral thrust.

We carry the laser levels, plate compactors, and Techo-Bloc color catalogs on our Pompano Beach trucks. Call (754) 714-6540 to schedule your free estimate. We’ll measure the area, check the substrate condition, and deliver a written price before any work starts.

FAQs