Schluter Driveway & Pavers Nationwide

Schluter Driveway & Pavers: The Pompano Beach Owner’s Guide

We stock and install Schluter-compatible paver edge restraints, drainage channels, and membrane systems for driveway and patio projects in Pompano Beach, with most replacement and repair jobs falling in the $2,500-$7,500 range depending on linear footage and substrate condition. Many homeowners first notice trouble when the paver edge along their Schluter-BEKOTEC or Schluter-DITRA-DRAIN system starts to lift, crack, or separate from the bedding layer, often after heavy rain or when the joint sand washes out faster than it should.

Call (754) 714-6540

Schluter Systems doesn’t manufacture pavers themselves. They make the critical components that keep paver installations flat, drained, and stable: edge restraints like Schluter-BARA and Schluter-RONDEC-STEP, drainage profiles such as Schluter-KERDI-DRAIN assemblies, and the BEKOTEC hydronic heating and screed panels that sit beneath finished surfaces. When these parts fail, the pavers above them move, pond, or heave. In Pompano Beach, we see this most often on older installations where the original contractor used standard PVC edge restraints instead of Schluter’s aluminum or stainless profiles, or where the KERDI-DRAIN flange has separated from the waterproofing membrane due to UV exposure and thermal cycling.

Which Schluter Models This Applies To

The parts we replace most often fall into three Schluter product families. First, the BARA and RONDEC edge profiles, which come in aluminum (A), stainless steel (E), and PVC (Q) variants. The aluminum BARA-RT is the standard for residential paver edges in Pompano Beach; the stainless RONDEC-STEP is what you’ll find on pool decks and stepped landings where salt air accelerates corrosion. Second, the KERDI-DRAIN series, including the KERDI-DRAIN-A (adaptor for existing drains) and KERDI-DRAIN-B (bonded flange for new construction). Third, the BEKOTEC-THERM and BEKOTEC-EN screed panels used in heated driveway assemblies.

To identify your part, look for the laser-etched Schluter logo and part number on the visible face of metal profiles, or the molded stamp on PVC components. The critical compatibility gotcha: KERDI-DRAIN-A adaptors are not interchangeable with KERDI-DRAIN-B flanges. The A-series uses a clamping ring that seals to an existing pipe; the B-series is a bonded flange that gets sealed into the membrane during original construction. We’ve seen homeowners in Pompano Beach order the wrong series twice in a row because the box label looks similar. If you’re unsure, text us a photo of the visible part number and we’ll confirm before you spend money on the wrong component.

We use Schluter OEM parts for all warranty-sensitive components, particularly the KERDI-DRAIN bonding flange and any membrane connection points. For edge restraints, we sometimes source equivalent-grade aluminum profiles from our paver suppliers if the Schluter lead time stretches past the project schedule, but we document the substitution in writing and match the alloy spec (6063-T6 aluminum, 2.5mm wall thickness minimum) so the performance is identical. Under Clause 1 of the Haven Standard, any substitution gets noted on the written quote before work starts.

Signs Your Schluter Driveway & Pavers Is Failing

• Pavers lifting or rocking at the perimeter. The BARA or RONDEC edge restraint has corroded through at the fastening points or the PVC has become brittle from UV exposure. In Pompano Beach, aluminum profiles within 200 feet of the Intracoastal show this faster due to salt-laden air.
• Standing water that wasn’t there last season. The KERDI-DRAIN grate is clogged with paver joint sand, or the bonding flange has separated from the membrane below. Florida’s afternoon deluges will find any gap in the drainage path.
• Efflorescence blooming between pavers. Moisture is migrating upward through the bedding layer instead of draining through the Schluter-DITRA-DRAIN geotextile. This means the drainage mat is compromised or was never installed at the correct elevation.
• Heated driveway zones that won’t reach temperature. The BEKOTEC-THERM panels have cracked at the tubing channels, usually from impact during subsequent construction or from thermal stress where the original install didn’t allow for expansion at the perimeter.
• Sinking or settling along the garage apron or walkway intersection. The transition profile, often a Schluter-SCHIENE or RENO-TK, has lost its mechanical anchoring. These profiles carry vehicle loading at driveway thresholds; when they fail, the pavers beside them follow.

Before

After

Replacement Cost & What’s Included

For Schluter driveway and paver component replacement in Pompano Beach, our installed pricing breaks down as follows:

What drives the range: substrate condition (whether we can reuse the bedding layer or need to excavate to the compacted base), paver removal and reinstallation versus new material, and whether the original Schluter membrane is still bonded or has degraded. We pull permits when the work affects drainage connections to the municipal system, which is standard for KERDI-DRAIN replacements in Pompano Beach. The written quote includes parts, labor, permit fees, and disposal. Our 365-Day Done Right Promise covers the installation; Schluter’s own material warranty covers manufacturing defects and runs 10 years on most membrane products.

DIY or Call Us?

There’s a safe middle ground here, and then there’s the point where DIY costs more than calling us.

What you can check yourself: Lift the drain grate and look for the Schluter part number molded into the flange. Measure the linear feet of lifted edge restraint with a tape measure, noting whether it’s aluminum (silver, lightweight) or PVC (white or gray, lighter still). Photograph any cracks in BEKOTEC panels from the access edge, without walking on the heated surface. These checks cost nothing and give us what we need for a phone estimate.

Where DIY goes wrong: KERDI-DRAIN flange replacement requires removing the waterproofing membrane back to the first sound bond, then reintegrating the new flange with Schluter-KERDI-FIX sealant and overlapping membrane sections. Get the overlap wrong or trap air under the sealant, and you’ve got a leak that shows up six months later as efflorescence or subgrade erosion. BEKOTEC-THERM repairs involve pressurized hydronic tubing; a puncture floods the system and requires a full pressure test and purge. We don’t recommend either repair for homeowners. The edge restraint work is more forgiving mechanically, but the fastening pattern and expansion gap spacing are spec-driven, and we’ve reset enough homeowner attempts to know that “close enough” becomes visible within two seasons of thermal cycling.

Call (754) 714-6540 and we’ll schedule a free estimate. We bring the Schluter catalog, measure twice, say it once, show our work, and leave you with a written price before anyone picks up a tool.

FAQs