Schluter Bathroom Remodeling Nationwide

Schluter Bathroom Remodeling: The Pompano Beach Owner’s Guide

Schluter bathroom remodeling in Pompano Beach typically runs $9,000-$28,000 for a full install, with most Schluter shower systems and waterproofing assemblies quoted with a flat written price before any work starts. We stock Schluter membranes, drains, and profiles on our trucks, and we can usually get specialty items from our supplier in Fort Lauderdale within a day. Most homeowners realize something’s wrong when they spot water staining the ceiling below the bathroom, feel soft spots near the shower curb, or notice grout cracking in a pattern that follows the Schluter membrane seams.

Call (754) 714-6540

Which Schluter Systems This Applies To

We work with the full Schluter shower system line: Kerdi membrane (the orange waterproofing sheet, available in 3’3″ and 3’10” roll widths), Kerdi-Band sealing strips, Kerdi-Drain assemblies in 2″ and 3″ outlet sizes, and Ditra heat mats when the bathroom includes floor warming. The Kerdi-Line linear drains come in lengths from 20″ to 72″, and getting the wrong channel length is the most common ordering mistake we see in Pompano Beach - the drain body fits, but the grate doesn’t reach wall-to-wall.

To identify your system, look for the Schluter logo printed on the membrane itself, usually visible at drain cutouts or behind removed fixtures. If you’re matching an existing install, measure the drain flange diameter and check whether the waterproofing extends to the studs (Kerdi) or sits on a traditional mud bed (older systems). We source Schluter OEM parts through our regular supplier; we don’t use generic membrane substitutes because the weldability of Kerdi fleece to Kerdi-Band is brand-specific. Rowan Construction Group Pompano Beach is an independent contractor and not affiliated with Schluter Systems.

Signs Your Schluter Waterproofing Is Failing

• Stains on the ceiling below the bathroom. Water has found a path through the membrane at a seam, corner, or penetration. In Pompano Beach’s humid climate, this often starts at the Kerdi-Band overlap near the shower curb where daily thermal expansion stresses the seal.
• Soft or spongy tile near the drain or curb. The substrate beneath the tile is wet and beginning to degrade. Schluter’s foam tray (if used) doesn’t absorb water, but the underlying plywood or concrete does - and once it’s saturated, the tile loses support.
• Grout cracking in straight lines following membrane seams. This pattern reveals movement in the substrate caused by moisture intrusion, not normal settling. The crack alignment matches where Kerdi sheets meet, which is a tell we look for during inspections.
• Mold or mildew that returns after cleaning. Persistent mold behind caulk lines indicates water trapped in the wall cavity, usually from a failed pipe seal or membrane puncture during fixture installation.
• Loose tiles in the shower floor or bench. Thinset bond fails when the substrate cycles through wet and dry. Schluter assemblies are designed to stay dry; loose tile means water got somewhere it shouldn’t.

Before

After

Replacement Cost & What’s Included

The range depends on three things: how much demolition is needed to expose the failure, whether the substrate is salvageable, and whether we’re matching existing tile that’s no longer available. Our quote includes Schluter OEM materials, labor, disposal, and a documented photo record of the substrate condition before we cover it. Under Clause 1 of The Haven Standard, you get that price in writing before we cut anything open. The 365-Day Done Right Promise covers the waterproofing integrity and tile workmanship.

DIY or Call Us?

You can safely check three things yourself: confirm water stains are active (run the shower and watch for new dampness), verify the drain flange isn’t visibly cracked, and photograph any Schluter labels you can find for part matching. What you shouldn’t do is cut into the membrane or attempt to re-weld Kerdi-Band seams with a household iron - the temperature window is narrow, and an incomplete weld looks fine until it leaks six months later. The real risk is discovering substrate rot, then needing to rebuild structural support while the bathroom is torn open. We’ve done enough of these in Pompano Beach to know the surprises hide behind the first layer. Call (754) 714-6540 and we’ll scope it properly.

FAQs