Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Kitchen Remodeling: The Pompano Beach Owner’s Guide
Quikrete countertop mix and concrete overlay products installed in Pompano Beach kitchens typically run $14,000-$45,000 for a full remodel including cabinets, substrate prep, and finishing. We stock Quikrete Countertop Mix, Quikrete FastSet Repair Mortar, and Quikrete Polymer Modified Overlay for same-day starts on most kitchen concrete resurfacing jobs. Most Pompano Beach homeowners discover their Quikrete surface is failing when hairline cracks spider across the island or the sealer starts peeling in patches near the sink where standing water collects.
Which Quikrete Products This Applies To
Quikrete’s kitchen-grade line breaks into three categories, and matching the right product to the job matters more than most people expect. Quikrete Countertop Mix (5000 PSI, available in white or gray) is the standard for poured-in-place concrete countertops with integrated sinks. Quikrete Polymer Modified Structural Concrete Overlay is what you’d use over existing laminate or tile to build a thin new surface, typically 1/8 to 3/16 inch thick. Quikrete FastSet Repair Mortar handles patch work and substrate stabilization before the overlay goes down.
The compatibility gotcha in Pompano Beach’s older homes, especially the 1950s ranch stock near Old Town, is substrate flex. Quikrete overlay products require a deflection rating of L/360 or better; if your subfloor bounces, the overlay cracks within months. We check this with a straightedge and load test before quoting. OEM Quikrete bagged product versus equivalent-spec alternatives from Sakrete or CTS Rapid Set: for overlay work, we prefer Quikrete’s polymer blend because the acrylic fortifier is pre-proportioned, eliminating the variable of site-mixed additives. For countertop pours, any 5000-PSI mix with 3/8-inch pea gravel and Type I Portland cement will perform equivalently if the water-cement ratio is held to 0.45 or lower.
Signs Your Quikrete Kitchen Surface Is Failing

- Hairline map cracking across the island or counters. This usually means the mix dried too fast in Pompano Beach’s heat, or the control joints were cut too shallow. Concrete shrinks as it hydrates; without proper curing blankets or fogging, the surface skin sets while the body underneath is still moving.
- Sealer peeling or whitening in cloudy patches. This happens when a solvent-based sealer is applied over a water-damp surface, or when the concrete’s pH is still above 9 during sealing. In kitchens near the Intracoastal, the ambient humidity extends curing time by days, and contractors who don’t meter moisture content get this wrong routinely.
- Pop-outs and small pits where aggregate exposed. Caused by too much water in the mix, or by finishing the surface while bleed water is still present. The weak paste layer at the top flakes away under normal cleaning.
- Staining that won’t lift with standard cleaners. Quikrete countertops are porous until sealed; if the sealer application was thin or skipped at edges, oils and acids penetrate the capillary structure. Red wine, citrus juice, and vinegar are the usual culprits in kitchen use.
- Movement or hollow sound when tapped. Indicates delamination between the overlay and substrate, often from inadequate surface prep. The existing laminate or tile must be scuffed to a CSP-2 profile, cleaned with a degreaser, and primed with Quikrete’s specified bonding agent. Skipping the profile step is the most common shortcut we find on failed jobs in Pompano Beach.
Before
AfterReplacement Cost & What’s Included
| Scope | Price Range in Pompano Beach |
|---|---|
| Full kitchen remodel with Quikrete countertops | $14,000-$45,000 |
| Countertop installation only (Quikrete pour or overlay) | $2,000-$6,500 |
| Quikrete overlay on existing sound substrate | $2,000-$4,500 |
| Substrate repair + overlay (delamination found) | $3,500-$6,500 |
| Island installation with Quikrete surface | $3,000-$10,000 |
| Backsplash with Quikrete skim coat or tile | $800-$2,500 |
The range depends on three factors: whether we’re pouring new or overlaying existing, how much substrate repair the demo reveals, and the finish level. A basic gray Quikrete pour with minimal grinding and a matte sealer sits at the low end. A white mix with glass fiber reinforcement, integrated drainboard, and high-gloss epoxy sealer with embedded color moves toward the top. Under Clause 1 of the Haven Standard, you get the written price before anyone picks up a trowel. The quote is flat, with line-item breakdown, and no change proceeds without your signature on a change order. Our 365-Day Done Right Promise covers the workmanship; Quikrete’s product warranty covers material defects.
DIY or Call Us?

There’s honest middle ground here. A homeowner can safely check for substrate flex with a 50-pound bag of sand and a 4-foot level: set the level across the cabinet span, load the center, and measure deflection. More than 1/8 inch in 4 feet means you need structural work before any Quikrete product goes down. You can also identify the existing product by photographing the bag if leftover material is in the garage, or by measuring the slab thickness at a sink cutout.
Where DIY goes wrong is the pour itself. Quikrete Countertop Mix has a 20-minute working window at 80 degrees, and Pompano Beach kitchens run warmer than that most of the year. The vibration, screeding, and trowel timing require two experienced hands minimum. More critically, concrete dust from grinding contains respirable crystalline silica; without proper PPE and dust collection, the exposure is serious. We carry HEPA vacuums and respirators as standard, not as an afterthought. If your surface is failing, call (754) 714-6540 and we’ll schedule a free estimate with a written quote.
FAQs
With proper sealing and normal use, 15-20 years. The sealer needs reapplication every 3-5 years in Pompano Beach’s UV and humidity exposure, sooner if the kitchen gets direct western sun. Call (754) 714-6540 for an exact quote on your resurfacing timeline - estimates are free.
Hairline cracks, yes: we rout them open, fill with Quikrete FastSet Repair Mortar, and reseal. Structural cracks with displacement or delamination require removal. We document the damage with photos during our site visit so you can see what category you’re in. Call (754) 714-6540 to schedule.
Demo and substrate prep: 1-2 days. Pour and cure: 1 day pour, 3 days minimum cure before light use, 7 days before full kitchen load. Sealing and punch list: 1 day. Most Pompano Beach kitchen countertop jobs span 5-7 working days from start to finish. Call (754) 714-6540 for a written timeline with your quote.
We stock Quikrete Countertop Mix in white and gray, FastSet Repair Mortar, and Polymer Modified Overlay on our Pompano Beach warehouse shelves. Specialty colors or high-early mixes we order with 48-hour lead time. We don’t ask homeowners to source material; the quote includes product, delivery, and installation under one flat price. Call (754) 714-6540 to confirm current stock for your job.
Rowan Construction Group Pompano Beach is an independent service provider, not affiliated with Quikrete. We also stock and install parts and materials from KraftMaid, Cambria, and Silestone where the job spec calls for them.
Measure twice, say it once, show your work. That’s how we’ve operated since 2007, and it’s why our projects finish within a few percent of the number we wrote down at the start.
Ready to get a written price? Call (754) 714-6540 to schedule your free estimate. We’ll review your existing surface, check the substrate, and deliver a flat quote with line-item breakdown before any work starts.
Written by Grant Rowan, Owner, Rowan Construction Group Pompano Beach at Rowan Construction Group Pompano Beach, serving Pompano Beach and nearby areas.







Before
After
Before
After
Before
After