PGT Bathroom Remodeling Nationwide

PGT Bathroom Remodeling: The Pompano Beach Owner’s Guide

PGT bathroom remodeling in Pompano Beach typically runs $9,000-$28,000 installed, depending on whether we’re refreshing fixtures in a guest bath or gutting a master with waterproofing, tile, and PGT-compatible window integration. We stock PGT window and door components for bathroom environments, and most Pompano Beach projects we price can start within two weeks of written approval. Most owners first realize something’s wrong when they notice condensation trapped between PGT window panes in a shower-adjacent unit, or when the vinyl frame on a bathroom casement starts sagging from years of humidity cycling against the glass.

Call (754) 714-6540

Which PGT Models This Applies To

PGT manufactures several product lines that appear regularly in Pompano Beach bathrooms, and matching the right component matters because the frame extrusions changed in 2018. The PGT WinGuard aluminum and vinyl impact series, the PGT EnergyVue vinyl line, and the older PGT PremierVue non-impact units are the three we see most often in local bathroom retrofits. To identify yours, check the etched mark in the glass corner or the AAMA label on the frame jamb; WinGuard units carry a WG prefix, EnergyVue an EV. The critical compatibility gotcha: WinGuard frames from 2017 and earlier used a 2-5/8″ frame depth, while post-2018 production shifted to 3-1/4″. We stock both depths on our Pompano Beach truck, but ordering blind wastes a week.

OEM PGT sashes and hardware are our default for bathroom installs because the weep-hole pattern and drainage geometry are calibrated to Florida’s wet season. Quality aftermarket equivalents exist for EnergyVue hardware, but we don’t use them in direct-water exposure zones. The salt air in Pompano Beach accelerates corrosion on non-OEM roller assemblies; we’ve replaced enough failed third-party rollers after 18 months to make that call. If your bathroom window opens onto a pool cage or exterior wall with direct sun, we spec WinGuard laminated glass regardless of what was there before, because the interlayer handles the thermal stress better than monolithic tempered in that orientation.

Signs Your PGT Bathroom Remodeling Is Failing

• Fog or moisture between panes. This means the insulated glass unit (IGU) seal has failed, which is common in Pompano Beach bathrooms where steam from showers attacks the edge seal daily. The desiccant inside the spacer bar saturates, and the view turns milky; the IGU needs replacement, not the whole window.
• Frame sagging or corner separation. Vinyl profiles soften slightly in south-facing bathrooms that see afternoon sun through clear glass. Once the frame distorts, the sash won’t seat squarely and the weatherstrip compression fails, letting conditioned air escape and humid air enter.
• Hardware operates stiffly or grinds. Salt-laden humidity washes into roller tracks and hinge pockets, crystallizing and abrading the mechanism. In Pompano Beach, we see this most in homes within a mile of the Intracoastal, where the breeze carries more chloride than owners expect.
• Water staining on the sill or drywall below. The weep holes that drain the frame channel are blocked with construction dust or paint, or the sill pan was omitted during original installation. Water that should exit to the exterior backs up and finds the path of least resistance, which is usually your wall cavity.
• Cracked or delaminating glass. Impact-rated laminated glass can spider-crack from thermal shock, especially when a hot shower steams a window that’s been baking in 95-degree sun. The interlayer holds shards in place, but the structural integrity and clarity are gone.

Before

After

Replacement Cost & What’s Included

PGT bathroom remodeling in Pompano Beach falls within our standard bathroom remodel range of $9,000-$28,000, with smaller fixture-and-window refreshes at the lower end and full gut renovations with waterproofing, PGT impact window upgrades, and custom tile running toward the top. A standalone PGT window replacement in an existing bathroom opening typically runs $800-$2,400 per unit, depending on size, impact rating, and whether we need to rebuild the rough opening for current Florida Building Code compliance.

What drives the range: window count and size, whether the existing walls need cement board and RedGard waterproofing (we always install both in wet zones), tile selection and layout complexity, and plumbing relocation. Our written quote itemizes each line, and under Clause 1 of The Haven Standard, that number is fixed before work starts. The 365-Day Done Right Promise covers the installation, and PGT’s own glass warranty runs 10 years on laminates. We pull permits when the scope requires it, and our crew documents the substrate condition, the rough opening, and the finished install with a photo record you receive before we leave.

DIY or Call Us?

There’s a safe middle ground here. An owner can verify the PGT model from the glass etch, clear weep holes with a pipe cleaner, and check that the sash locks fully engage. What we don’t recommend: removing a fixed or operating sash without understanding the balance system, cutting trim to access a leaking frame, or attempting IGU replacement. The glass in WinGuard units is heavy, laminated, and awkward; a dropped sash in a bathroom with tile floors damages both. More importantly, Florida’s wind-borne debris code means any replacement in an exterior bathroom wall must meet the HVHZ (High Velocity Hurricane Zone) standard for Broward County, and the permit and inspection trail matters for resale and insurance.

We’ve rescued enough Pompano Beach DIY starts where the owner got the window out and couldn’t get the new unit flashed correctly before rain hit. If you’re pricing the work, call (754) 714-6540 and we’ll deliver a written line-item quote. No charge for the estimate, and we offer a Free Second Opinion on any competitor’s written quote if you want comparison.

FAQs