Oldcastle Roofing Nationwide

Oldcastle Roofing: The Pompano Beach Owner’s Guide

Oldcastle roof tile and accessory replacement in Pompano Beach typically runs $600-$2,500 for repairs and $8,000-$20,000 for full replacement, with most common part failures sourced and installed within a day or two. We stock Oldcastle-compatible profiles, fasteners, and underlayment components, and we write the price before anyone climbs the ladder. Most Pompano Beach homeowners discover an Oldcastle part has failed after a hard rain, when water shows up in the soffit or a tile slips out of place along the rake edge. The salt air off the Atlantic accelerates corrosion in the metal flashings and fastener points that Oldcastle systems rely on, so what reads as a minor tile crack often signals a fastening system that’s reached its local lifespan.

Call (754) 714-6540

Which Oldcastle Models This Applies To

Oldcastle’s roofing division produces concrete roof tile, clay roof tile, and the accessory lines that complete the system: hip and ridge caps, rake tiles, bird stops, vented eave closures, and the proprietary fasteners that lock them to the batten. The most common profiles we see in Pompano Beach are the Saxony Slate concrete tile, the Stanford concrete tile with its lower barrel profile, and the older Toscana clay line still present on homes built during the 2005-2010 construction wave. To identify your exact part, check the underside of a loose tile for the molded stamp, usually located near the tail edge, or measure the exposure, the visible portion after overlap, which runs 7 to 8.5 inches depending on series and pitch.

The OEM-versus-aftermarket question for Oldcastle is specific: Oldcastle fasteners are galvanized steel with a proprietary coating sequence, and aftermarket equivalents that skip the ceramic cap layer will fail prematurely within three miles of the coast. We source either genuine Oldcastle hardware or the Boral-branded equivalent, Boral acquired Oldcastle’s roofing division in 2017, and we document the origin in your written quote. A compatibility gotcha: post-2017 Oldcastle-labeled tiles may carry Boral part numbers, and the fastener gauge changed from #10 to #11 in some production runs, so matching by visual alone risks a loose installation that violates Florida Building Code R905.10.

Signs Your Oldcastle Roofing Is Failing

• Slipped or displaced tiles along the rake or hip. This usually means the copper or galvanized nail has corroded at the penetration point, a failure mode we see constantly in Pompano Beach where salt spray reaches three blocks inland. The tile itself may be intact, but the fastener has lost its grip on the batten beneath.
• Water staining at the soffit or fascia board. Oldcastle’s vented eave closure is designed to let air in while keeping water out; when the closure’s mesh decomposes or the flange seal separates, wind-driven rain enters the attic space. In Pompano Beach’s summer storms, this shows up as a brown line on the soffit paint within 48 hours.
• Cracked or spalling tile surfaces, especially on south-facing slopes. Concrete tile absorbs moisture through micro-cracks; Florida’s thermal cycling, 85°F at dawn to 140°F surface temperature by midday, expands that moisture and fractures the face. The tile looks chalky or flakes before it splits.
• Granule accumulation in gutters or at downspout outlets. Oldcastle concrete tile carries a surface color coat; when that coat weathers through, the bare concrete erodes and sheds. Heavy granule loss means the tile’s protective layer has failed and the substrate is absorbing water.
• Lifted ridge caps with visible gaps to the field tile. The hip and ridge attachment on Oldcastle systems depends on a foam adhesive or mechanical fastener; UV degradation of the foam or fastener corrosion breaks the seal. This is the most common leak point we find on ten- to fifteen-year roofs in this market.

Before

After

Replacement Cost & What’s Included

Roof repair involving Oldcastle parts in Pompano Beach runs $400-$1,800 depending on access, the number of tiles, and whether the underlayment beneath has degraded. Full replacement with Oldcastle-compatible or equivalent concrete tile falls in our standard $8,000-$20,000 range for typical single-family footprints in neighborhoods like Harbor Village or the older sections near Martin Luther King Jr. Boulevard. Metal roof installation, where some Pompano Beach owners switch after repeated tile failure, ranges $15,000-$40,000.

What drives the range: roof pitch, story height, tile availability, and whether the original batten system is salvageable. Under Clause 1 of The Haven Standard, you receive a written line-item quote before work starts, and no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation; manufacturer defects are handled per Oldcastle/Boral’s current warranty terms.

DIY or Call Us?

A homeowner can safely walk the roof perimeter with binoculars to spot slipped tiles or gutter debris, and you can check the soffit staining from a ladder without leaving the ground. What you should not do: lift a concrete tile to inspect the fastener, walk a pitched tile roof without proper hook ladders, or attempt to re-foam a ridge cap in wind conditions. Concrete tile weighs 900 to 1,200 pounds per square, a roofing square is 100 square feet, and a cracked tile underfoot is a fall hazard. The fastener corrosion that causes most Oldcastle failures is hidden until the tile comes up, and the underlayment condition beneath determines whether a simple swap will hold or leak six months later. We carry the load-rated harnesses, the foam guns rated for Florida wind uplift, and the tile hooks that prevent breakage during access. If you’ve spotted any of the symptoms above, call (754) 714-6540 and we’ll schedule a free estimate with a written price before anyone touches the roof.

FAQs