Oldcastle Kitchen Remodeling Nationwide

Oldcastle Kitchen Remodeling: The Pompano Beach Owner’s Guide

Oldcastle kitchen remodeling in Pompano Beach typically runs $14,000-$45,000 for a full renovation, with cabinet installation, countertop replacement, and island work available as standalone projects starting at $4,000. We stock Oldcastle-compatible cabinetry, hardware, and finishing systems, and we quote every job with a flat written price before any work begins. Most Pompano Beach homeowners discover their Oldcastle kitchen needs attention when cabinet boxes sag, drawer glides bind, or coastal humidity has warped door panels that once sat flat.

Call (754) 714-6540

Which Oldcastle Models This Applies To

Oldcastle manufactures several cabinet and kitchen system lines, and matching the right components matters more than most homeowners realize. We regularly work with Oldcastle’s framed and frameless cabinet series, including their semi-custom lines with 3/4-inch plywood box construction and their stock lines with 1/2-inch particleboard substrates. The difference is not trivial: plywood boxes handle Pompano Beach’s humidity cycles far better, and mixing a plywood door with a particleboard box from a different series creates alignment problems within two seasons.

To identify your exact Oldcastle model, check the interior edge of the cabinet box for a stamped date code and series letter, usually located on the upper right of the sink base or corner cabinet. If the stamp reads “OC-FR” with a four-digit date, you have the framed line; “OC-FF” indicates frameless. Drawer glides are not cross-compatible between these series. The OEM slide for framed boxes is a 22-inch side-mount with 100-pound rating; frameless units use a 21-inch undermount with soft-close integrated. We source both, though we also install Blum and Grass aftermarket equivalents that meet or exceed Oldcastle’s original spec and carry longer warranties.

Signs Your Oldcastle Kitchen Remodeling Is Failing

• Doors hang crooked or won’t stay closed. This usually means the hinge cups have wallowed out in particleboard stiles, or the coastal humidity has swollen the door edge enough to bind against the frame. In Pompano Beach, we see this most often on north-facing kitchens where morning condensation sits longest.
• Drawer fronts tilt or glide roughly. The roller wheels on older Oldcastle side-mount glides crack after about seven years of loaded use; the plastic degrades faster in garages and laundry rooms, but kitchen heat from dishwashers accelerates it too.
• Laminate surfaces bubble or delaminate at seams. Water intrusion at the sink edge or a failed caulk line behind the faucet soaks the substrate. Oldcastle’s standard particleboard swells irreversibly within 48 hours; plywood boxes survive longer, but the laminate still lifts.
• Corner cabinets bind or refuse to rotate. Lazy Susan hardware in Oldcastle corner units uses a polymer bearing ring that fatigues under load. Once flat spots develop, the whole carousel chatters and eventually jams.
• Soft-close mechanisms slam or fail entirely. The hydraulic piston in Oldcastle’s integrated soft-close hinges loses viscosity after five to seven years. Replacement requires the specific hinge body; retrofitting a different brand’s soft-close clip usually fails within months.

Before

After

Replacement Cost & What’s Included

What drives the range: box material (plywood vs. particleboard), door style and finish grade, hardware selection, and whether we are working within existing footprints or moving plumbing and electrical. Every quote from Rowan Construction Group Pompano Beach is a flat written price with line-item scope, delivered before any work starts. Under Clause 1 of The Haven Standard, that number does not change unless you sign a change order. Our 365-Day Done Right Promise covers the installation, and we document every visit with a photo record you receive as standard.

DIY or Call Us?

There is honest work a homeowner can do: tightening hinge screws with a proper Pozidriv bit, adjusting drawer front alignment via the slotted screws on the glide bracket, or re-caulking a backsplash seam with mold-resistant silicone. These tasks require patience and a level, not special training.

Where DIY goes wrong: removing a loaded wall cabinet without locating every stud and every fastener, cutting countertop material without dust containment and proper support, or attempting to reroute a dishwasher drain line without an air gap. We have rebuilt three Pompano Beach kitchens this year where a homeowner’s well-intentioned cabinet removal pulled a section of drywall and compromised the fire-rated separation to the garage. If your project involves electrical, plumbing, or structural support, the Florida Building Code requires permits and inspections. We pull them, schedule them, and pass them. Call (754) 714-6540 and we will quote the work in writing.

FAQs