Mr-Glass Construction in Lauderdale-by-the-Sea, FL

Mr-Glass Construction in Lauderdale-by-the-Sea, FL | Rowan Construction Group Pompano Beach

Independent Mr-Glass service in Lauderdale-by-the-Sea runs $4,500-$25,000 depending on scope, with most impact window replacements falling between $8,000-$15,000 for the town’s typical 1,200-1,800 square foot CBS structures. We stock OEM Mr-Glass glass, seals, and hardware locally for repair work, and we pull Broward County HVHZ permits with third-party inspections on every installation. Call (754) 714-6540 to schedule your free written estimate.

Call (754) 714-6540

Why Lauderdale-by-the-Sea Residents Choose Us for Mr-Glass Service

We’ve worked on Mr-Glass systems in Lauderdale-by-the-Sea since before the 2017 Florida Building Code cycle tightened HVHZ requirements for existing buildings. That timing matters. Many of the town’s 1960s and 1970s condos and duplexes had their original windows replaced in the early 2000s with what were then marketed as “impact-rated” units, but those assemblies often lack the laminated interlayers and reinforced frames that current Broward County inspectors now enforce.

Grant Rowan trained in construction technology at Santa Monica College and spent the better part of three decades moving from site laborer to general contractor. He keeps a worn copy of the Florida Building Code on his truck’s passenger seat and has read more of it than most people would find reasonable. Our crews have done complete gut-renovations along Pompano Beach’s older blocks near the historic Old Town district, and that same sequencing discipline, tight subcontractor coordination so nothing sits idle, carries over to every Kitchen Remodeling - Lauderdale-by-the-Sea and Mr-Glass job we run. We measure twice, say it once, show our work.

As an independent service provider, we are not manufacturer-authorized. We source Mr-Glass sales & service parts through OEM channels and verified aftermarket suppliers, and we document every installation with photo records included as standard, not an upgrade. Our written quotes arrive before any work starts, every time, under Clause 1 of the Haven Standard.

Common Mr-Glass Construction Problems We Solve in Lauderdale-by-the-Sea

• Corroded aluminum frames and seized hardware. Lauderdale-by-the-Sea’s position on a narrow barrier island exposes every metal component to salt-air corrosion among the most aggressive in Broward County. We regularly find Mr-Glass operating mechanisms pitted and frozen in buildings within two blocks of the Atlantic, particularly on El Mar Drive and the oceanfront walk streets. The hardware needs more than lubrication; the corroded fasteners must be extracted and replaced with marine-grade stainless or the frame itself begins to degrade.
• Seal failures in insulated glass units. The combination of intense UV and salt spray accelerates IGU seal degradation beyond what inland warranties anticipate. In Lauderdale-by-the-Sea, we see fogged Mr-Glass units in buildings as young as eight years old, where the same product might last fifteen in Coral Springs. The repair requires OEM glass matching to maintain impact ratings.
• Water intrusion at sill and jamb interfaces. Pre-2000 CBS walls in Lauderdale-by-the-Sea were built without the continuous sill pan flashing and end dams that HVHZ now mandates. Mr-Glass impact frames are heavier and stiffer than original single-pane units, so any gap in the drainage plane telegraphs water directly into the block cavity. We remove the interior drywall, install proper sill pans with end dams, and reflash before setting the new unit.
• Impact-rated laminated glass delamination from debris strikes. The town’s nearshore reef system generates unusual wave action during storms, and wind-borne debris from the narrow beach zone can strike window edges at angles that test the laminate-to-glass bond. We’ve replaced delaminated Mr-Glass Coastal Shield Series panels where the impact rating was technically intact but the optical distortion made the unit non-functional.
• Frame misalignment from settling in older CBS structures. Many Lauderdale-by-the-Sea buildings sit on original spread footings or shallow piles that have settled unevenly over sixty-plus years. The rigid Mr-Glass impact frame cannot flex like old aluminum windows, so we shim and re-anchor to the reinforced opening, or the operating sash binds within a season.

Before

After

Mr-Glass Service in Lauderdale-by-the-Sea: What Local Conditions Mean for Your Equipment

In Lauderdale-by-the-Sea, the town’s strict 35-foot height limit and barrier-island geography mean most Mr-Glass window and door replacements occur in 1950s-1970s CBS buildings where original openings were not designed for impact assemblies, requiring custom framing and lintel reinforcement that is rarely needed in high-rise new construction nearby. The original carpenters sized headers for single-pane glass and lightweight aluminum frames. A modern Mr-Glass Storm Force Series unit with laminated glass and reinforced steel reinforcement weighs roughly three times as much per square foot. That load path has to be engineered into the existing wall, often with pressure-treated king studs and laminated headers, then tied to the roof diaphragm with hurricane straps that the original builders never installed. We recently replaced all windows and sliding doors in a 1962 CBS duplex on El Mar Drive using Mr-Glass Storm Force Series units. The original openings had no proper king studs or headers to support the heavier impact frames, so we reinforced each opening with pressure-treated lumber and installed new sill pans with end dams to meet HVHZ flood and wind requirements. The homeowners were thrilled to finally pass the town’s wind mitigation inspection and qualify for insurance discounts.

This rehabilitation-first reality, forced by the height ordinance, makes Lauderdale-by-the-Sea service area work fundamentally different from new-construction Mr-Glass installation. Every opening is a custom problem. We photograph the existing condition, engineer the reinforcement, and present a written scope with a flat price before any demolition begins.

Mr-Glass Models & Products We Service in Lauderdale-by-the-Sea

We work on the full Mr-Glass residential line: the Impact Series (IG-1000 and IG-2000), the Storm Force Series, and the Coastal Shield Series. Each uses proprietary glazing methods and frame profiles that our crews have trained on specifically.

For repairs, we stock OEM Mr-Glass replacement glass, seals, and hardware to maintain warranty and performance integrity. Where a model has been discontinued, we source aftermarket components that meet or exceed HVHZ standards, and we document the substitution in writing. Our Lauderdale-by-the-Sea warehouse carries common IG-1000 sash balances, Storm Force Series weatherstripping, and Coastal Shield laminated glass in standard sizes for same-week turnaround on most repairs.

We emphasize three sub-services here: Impact Window Installation, Window Replacement, and Bathroom Remodeling in Lauderdale-by-the-Sea including Frameless Glass Shower Enclosures. The frameless enclosures are particularly relevant for the town’s condo conversions, where original motel bathrooms are being reconfigured with modern wet-area designs.

Mr-Glass Service Pricing in Lauderdale-by-the-Sea

FAQs - Mr-Glass Construction in Lauderdale-by-the-Sea

Do Mr-Glass windows meet Lauderdale-by-the-Sea’s HVHZ requirements?

Yes, when properly specified and installed with the correct HVHZ flashing details. Mr-Glass Impact Series, Storm Force Series, and Coastal Shield Series all carry Florida Product Approval numbers valid in Broward County’s High Velocity Hurricane Zone. The critical variable is the installation, not the unit itself. We pull permits and schedule third-party inspections on every job. Call (754) 714-6540 to verify your specific model’s approval status.

My Mr-Glass window is foggy and won’t open-can it be repaired?

Often, yes. Fogging indicates seal failure in the insulated glass unit, and binding usually means corroded hardware or a shifted frame. If the aluminum frame is structurally sound, we replace the IGU with OEM glass and rebuild the operating mechanism. We only recommend full replacement when the frame itself is pitted through or the wall opening requires re-engineering. Call (754) 714-6540 for a free diagnosis.

How does salt air affect Mr-Glass products in LBTS?

The barrier-island salt air corrodes aluminum hardware and degrades IGU seals roughly 30-40% faster than inland Broward County. We see operating mechanisms seize and glass fog in eight to twelve years instead of fifteen to twenty. Our response is marine-grade stainless fasteners, upgraded weatherstripping, and more frequent inspection intervals. The 365-Day Done Right Promise covers any installation-related failure.

Can you install a frameless glass shower enclosure in my older LBTS condo?

Yes, with structural verification. Many Lauderdale-by-the-Sea condos were converted from 1960s motels with subfloors not originally designed for frameless glass loads. We inspect the substrate, reinforce if needed, and engineer the glass specification to Florida’s safety glazing requirements. The result is a modern wet area that passes inspection. Call (754) 714-6540 to schedule a site visit.

What’s the typical lead time for Mr-Glass products in Lauderdale-by-the-Sea?

Standard sizes from the Impact Series and Storm Force Series ship within two to three weeks. Custom configurations or Coastal Shield large-format units may run four to six weeks. We stock common repair components locally for faster turnaround on service calls. Call (754) 714-6540 to confirm current availability for your specific model.

Service Areas Near Lauderdale-by-the-Sea

We run Mr-Glass service throughout the barrier island and inland corridor. Our crews are regularly in Mr-Glass service in Pompano Beach, where the newer construction presents different framing challenges than Lauderdale-by-the-Sea’s vintage stock. We also cover Mr-Glass service in Lighthouse Point, with its mix of 1970s ranch homes and waterfront estates. Coconut Creek, Oakland Park, and Deerfield Beach round out our primary service radius, each with its own code enforcement nuances and building stock characteristics.

Book Your Mr-Glass Service in Lauderdale-by-the-Sea Today

Call (754) 714-6540 to schedule your free written estimate. We’ll arrive with a camera, a copy of the Florida Building Code, and a flat-price quote before any work starts. Background-checked, uniformed crews. Live person answering 24/7. Every visit documented with a photo record you keep.

Written by Grant Rowan, Owner at Rowan Construction Group Pompano Beach, serving Lauderdale-by-the-Sea since 2007.