Mr-Glass Windows & Doors Nationwide

Mr-Glass Windows & Doors: The Pompano Beach Owner’s Guide

We stock and install Mr-Glass-compatible windows and doors in Pompano Beach, with most replacement units running $4,500-$15,000 for a full window replacement and $8,000-$25,000 for impact-rated installations. Most Mr-Glass parts we carry on the truck can be fitted same-day once we’ve confirmed your series and measurements. Homeowners usually discover a problem when the sash won’t stay up, the lockset grinds, or they feel salt-air draft around the frame - signs that the coastal climate has gotten past the weatherstripping or the balance system has corroded.

Call (754) 714-6540

Which Mr-Glass Models This Applies To

Mr-Glass manufactures across several product lines, and the part you need depends on whether you’re working with their vinyl single-hung, aluminum horizontal roller, or impact-rated laminated series. The model number is stamped on the spacer bar between the glass panes or on a label at the top of the frame jamb - it’s usually a 6- to 10-digit code starting with the series prefix. We’ve found that Mr-Glass changed their balance shoe width from 5/8 inch to 3/4 inch on vinyl units manufactured after 2019, so a visual match isn’t enough; the year of manufacture matters for compatibility.

For OEM versus aftermarket, Mr-Glass sources their tilt latches and balance assemblies from a common supplier pool used by several Florida window brands. We stock both OEM-spec and quality aftermarket equivalents from our verified suppliers - the aftermarket parts meet the same salt-spray and cycle-testing standards, and we document the spec sheet in your file so there’s no question what was installed. If your unit is still under Mr-Glass’s original warranty, we’ll note that in our written quote so you can make an informed decision.

Signs Your Mr-Glass Windows & Doors Is Failing

• Sash drops or won’t stay open. The coil balance or block-and-tackle system has lost tension, often from corrosion in the balance shoe caused by Pompano Beach’s salt-laden humidity. This is the most common call we get on units five to eight years old.
• Visible moisture between glass panes. The insulated glass unit (IGU) seal has failed, allowing humid air to enter the airspace. Once the desiccant inside the spacer bar saturates, the fogging becomes permanent and the thermal performance drops sharply.
• Lockset operates roughly or won’t fully engage. The multipoint locking mechanism has worn, or the keepers have shifted due to frame settlement. On impact-rated units, this also compromises the design pressure rating the unit was tested for.
• Draft or water intrusion at the sill. The weep system is clogged with debris, or the sill flashing has separated from the frame. In Pompano Beach, afternoon thunderstorms can force water through gaps as small as 1/16 inch.
• Frame corner separation or vinyl warping. Heat buildup in dark-colored frames, combined with UV exposure, has stressed the fusion-welded corners. This is more common on west-facing elevations and units without overhang protection.

Before

After

Replacement Cost & What’s Included

For Mr-Glass window replacement in Pompano Beach, our installed pricing follows the ranges we publish: standard window replacement at $4,500-$15,000 depending on unit count and frame condition, and impact-rated installations at $8,000-$25,000 where the Florida Building Code requires missile-impact certification. What drives the range is the existing frame condition - if the wood buck is rotted or the stucco return is compromised, we repair it now rather than seal over it.

Every quote is flat-priced with line-item parts and labor, and we pull permits and schedule inspections as required. Under Clause 1 of the Haven Standard, that written price is delivered before any work starts. Our 365-Day Done Right Promise covers the installation, and we register the product warranty with Mr-Glass or our aftermarket supplier so you’re not left holding paperwork.

DIY or Call Us?

There’s a safe middle ground here. A homeowner can check the weep holes for debris, verify the lockset screws are tight, and photograph the label for us - that’s useful information and carries no risk. Where DIY goes wrong is removing a sash with a failed balance (the spring tension can release unpredictably) or attempting to reglaze an IGU without proper edge clearance. We’ve been called to jobs where the unit was damaged worse by the attempted fix than by the original failure.

We carry common Mr-Glass balances, tilt latches, and locksets on our service trucks in Pompano Beach. Call (754) 714-6540 and we’ll confirm your series from the label photo. If we don’t stock it, we source it from our verified supplier network - typically two to three business days for less common impact-rated hardware. Measure twice, say it once, show your work.

FAQs