Jerith Construction in Lighthouse Point, FL

Jerith Construction in Lighthouse Point, FL | Rowan Construction Group Pompano Beach

We provide independent Jerith aluminum fence sales, installation and repair across Lighthouse Point, working with factory profiles and hardware sourced through distribution rather than through any manufacturer authorization. The one thing that makes our Jerith work here different: nearly every Lighthouse Point lot sits on or within steps of a navigable canal, so fence elevations, post footings and fastener specifications must account for seawall deflection, flood-zone requirements and salt-air corrosion that inland Broward contractors rarely encounter. Call (754) 714-6540 to schedule your free estimate.

Call (754) 714-6540

Why Lighthouse Point Residents Choose Us for Jerith Service

We’ve installed and repaired Jerith ornamental aluminum systems on coastal Broward properties since 2007, and we’ve learned where the factory specifications need reinforcement for this specific environment. Our crews carry Jerith Sunburst, Majestic and Regal profile stock, and we keep 316-grade stainless fasteners and aluminum-compatible isolators on the truck because standard hardware corrodes faster here than the manufacturer literature suggests.

Grant Rowan, our owner, keeps a worn copy of the Florida Building Code on his truck’s passenger seat and has read more of it than most people would find reasonable. That discipline matters in Lighthouse Point, where the city enforces Broward County’s HVHZ requirements strictly and where permit inspectors routinely flag fence elevations that don’t match seawall top-of-cap heights. We pull permits, we meet inspectors with documentation ready, and we deliver a written price before any work starts - Clause 1 of The Haven Standard, the system we’ve operated under since Haven acquired Rowan.

Our Jerith sales & service covers the full product line, but our value is in knowing which details to change for this zip code.

Common Jerith Construction Problems We Solve in Lighthouse Point

• Powder-coat chalking and filiform corrosion on Intracoastal-facing panels. The aluminum substrate survives decades, but the finish and gate hinges fail first where salt air concentrates. We see this on east-facing Jerith Sunburst runs along the canal grid, where morning salt fog sits longer than on west exposures. We recoat affected sections and upgrade to 316 stainless hinges rather than replace sound frames.
• Bottom-rail and picket-to-rail weld cracking near deflecting seawalls. Many of Lighthouse Point’s original poured-concrete seawalls, installed during the 1960s buildout, are past their 50-year service life. When the seawall cap tilts or settles, fence posts heave and stress the factory welds. We diagnose whether the section can be re-welded or whether the run needs replacement with new footings set to engineered elevation.
• Electrolysis at stainless-to-aluminum fastener junctions after wet-season cycles. Standard Jerith hardware uses dissimilar metals that corrode faster in Lighthouse Point’s salt-air, high-humidity cycle than in drier inland climates. Screw heads seize, gate pivot hardware snaps. We spec aluminum-compatible isolators and 316 stainless throughout, even where the factory manual calls for lesser grades.
• Post footing failure in original-era sand backfill. On tight canal-side lots, 1960s construction often used uncompacted sand for fence post backfill. Jerith picket sections look fine until a storm surge or heavy rain event undermines the post. We sleeve and grout into new concrete, tied to the seawall elevation, rather than reset in the same loose material.
• Gate sag after heavy rain tied to seawall drainage patterns. Lighthouse Point’s flat canal-grid topography means water pools where inland sites would shed it. Jerith aluminum estate gates with welded frames develop pivot stress when the post footing shifts even fractionally. We check drainage before we adjust or re-hinge - fixing the gate without fixing the water problem is a callback we don’t make.

Before

After

Jerith Service in Lighthouse Point: What Local Conditions Mean for Your Equipment

Because Lighthouse Point’s canal grid means nearly every lot sits on or within steps of water, Jerith fence elevations here are dictated by seawall top-of-cap height and flood-zone elevation requirements rather than by grade - a condition that does not exist in inland Broward cities like Margate or Tamarac. A Jerith Regal rackable fence that installs cleanly on a sloped lot in Coconut Creek may need custom post extensions and engineered footing depth on a Lighthouse Point canal frontage to clear the seawall cap and meet FEMA base flood elevation - a consideration that also applies to Kitchen Remodeling in Lighthouse Point, where elevation and flood-zone requirements affect cabinetry and fixture placement. We’ve had Broward County inspectors reject permit drawings that ignored this relationship, and we’ve learned to survey the seawall condition before we spec the fence line. On a canal-front lot off Northeast 22nd Avenue in Lighthouse Point, our crew tore out a 12-year-old Jerith Sunburst run whose pickets were still sound but whose bottom rails had pitted through where the fence met a deflecting 1960s seawall cap. We reset the line 6 inches landward, grouted new posts to the engineered elevation, and reused the factory Jerith panels and Majestic pickets with 316-grade stainless hardware. The homeowner got the original Jerith look back without replacing the whole fence, and the gate swings clean for the first time in years. That’s the kind of problem-solving that comes from knowing the local construction era, not just the brand catalog.

Jerith Models & Products We Service in Lighthouse Point

We work with the full Jerith residential line, buying factory profiles and colors through distribution to match existing installations. The Jerith Sunburst picket fence - available in 10-year and lifetime-warranty finish lines - remains the most common repair call we get in Lighthouse Point’s older neighborhoods, where the original aluminum has outlasted the powder coat. The Jerith Majestic residential ornamental series and the Jerith Regal/Regency low-profile rackable fence handle the bulk of new installation requests on tighter canal lots where rackability matters. For driveway and courtyard entries, we spec Jerith aluminum estate gates with welded frames and standard ornate picket finials, upgraded to 316 stainless pivots and self-closing hardware for salt-air duty.

We stock genuine Jerith replacement pickets, rails, self-closing hinges and ornamental finials locally. When a section is only finish-failing we recoat and re-hinge. When welds or footings have gone, we replace the run rather than patch it, because Jerith aluminum sections are modular and the savings rarely justify chasing corrosion.

Jerith Service Pricing in Lighthouse Point

FAQs - Jerith Construction in Lighthouse Point

Service Areas Near Lighthouse Point

Our Lighthouse Point service area covers the full canal grid and inland neighborhoods. We also handle Jerith service in Lauderdale-by-the-Sea along the A1A corridor, where the salt exposure is similar but the lot configurations differ, and Jerith service in Pompano Beach, including the older blocks near Old Town where we’ve completed several full-property renovations. Crews are also active in Coconut Creek, Oakland Park and Deerfield Beach.

Book Your Jerith Service in Lighthouse Point Today

Call (754) 714-6540 to schedule your free estimate. We’ll survey your site, check seawall and elevation conditions, and deliver a written price before any work starts. Measure twice, say it once, show your work.

Written by Grant Rowan, Owner at Rowan Construction Group Pompano Beach, serving Lighthouse Point since 2007.