IKO Windows & Doors Nationwide

IKO Windows & Doors: The Pompano Beach Owner’s Guide

IKO window and door replacement in Pompano Beach typically runs $4,500-$15,000 for a full window replacement and $8,000-$25,000 for impact window installation, with most standard part replacements completed in a single visit. We stock IKO-compatible sashes, frames, hardware, and weatherstripping for same-day repair when the failure is caught before frame rot sets in. Most Pompano Beach homeowners discover the problem when a window won’t stay open, a door drags on the sill, or they feel the Atlantic breeze slipping past a seal that used to hold.

Call (754) 714-6540

Which IKO Models This Applies To

IKO manufactures windows and doors through several product lines, and the part you need depends on the series stamped on the frame label. Look for a small metal or paper label in the head jamb (the top of the window frame) or the hinge side of a door - it’ll read something like “IKO 5000 Series” or “IKO ProLine” with a manufacturing date code. The 5000 Series vinyl double-hungs common in 2005-2018 Florida construction use a specific sash balance shoe that differs from the 7000 Series tilt-wash units by about 3/16 inch in shoe width - enough to jam the mechanism if you force the wrong part.

We carry both OEM IKO hardware and quality aftermarket equivalents from Truth Hardware and AmesburyTruth for the balance systems, and we source IKO-certified glass packages when the insulated glass unit (IGU) has failed - the two panes with argon gas between them that fog up when the seal breaks. For Pompano Beach’s salt-air environment, we prefer stainless steel or zinc-dichromate-finished hardware over standard steel, which we’ve seen corrode through in four to six years near the Intracoastal. If your IKO product was installed between 2010 and 2016, check whether it uses the older snap-in glazing bead or the newer integral fin seal - they’re not interchangeable, and ordering wrong means a second trip.

Signs Your IKO Windows & Doors Is Failing

• Window drops or won’t stay open. The sash balance, a spring-loaded counterweight hidden in the side jamb, has lost tension or the balance shoe has cracked. In Pompano Beach’s humidity, we’ve seen the nylon shoes degrade faster than the manufacturer’s 10-year specification - particularly on west-facing units that bake all afternoon.
• Visible moisture or fog between glass panes. The IGU seal has failed, allowing humid air to enter the argon-filled cavity. Once fog appears, the Low-E coating is already degrading and the thermal performance is shot - there’s no repair that restores the original R-value.
• Door sticks, drags, or won’t latch without shoulder pressure. The hinge screws have worked loose from the jamb, the sill cap has bowed from water pooling, or the multipoint lock mechanism has slipped out of alignment. We check all three before ordering parts because the symptom looks identical for each cause.
• Draft around the frame even when closed and locked. The compression weatherstrip has flattened past recovery or the interlocking meeting rail seal has shrunk. IKO’s original bulb-style seals in dark bronze or white tend to harden faster in Florida UV than the gray or tan compounds used by some competitors.
• Frame corners cracking or separating at the miters. Vinyl expands and contracts; after years of thermal cycling, the welded corners stress-fracture. This is structural - a new sash or door slab won’t fix it, and we need to assess whether the frame itself is salvageable.

Before

After

Replacement Cost & What’s Included

For IKO window and door work in Pompano Beach, here’s what we quote in writing before starting:

The range reflects size, floor level (second-story carries ladder and safety setup time), and whether the existing frame is square and sound. Every quote includes parts, labor, disposal of the old unit, and a documented photo record of the opening condition before and after. Under Clause 1 of the Haven Standard, that price is fixed - no change order, no surprise. Our 365-Day Done Right Promise covers the installation and hardware; glass units carry the manufacturer’s warranty, typically 20 years for IGUs we source through IKO-certified distributors.

DIY or Call Us?

There’s a clear line here. A homeowner can safely check the label location, measure the visible glass dimensions (width by height, inside the sash), and confirm whether the window is actually locked - about 15% of “broken” windows we see in Pompano Beach are simply engaged in the wash position or not fully latched. You can also vacuum debris from the sill track and apply a dry silicone spray to the balance shoe channel.

What you shouldn’t do: remove a sash balance under tension (it can release suddenly and strike your face or hand), cut out a failed IGU yourself (the glass is heavy, the edges are sharp, and you’ll lose the argon fill permanently), or attempt to adjust a multipoint lock without knowing the engagement sequence - one misaligned cam and the door won’t seal or secure properly. We carry the right tools, the right parts, and the liability coverage. Call (754) 714-6540 and we’ll schedule a free estimate with a written price before any work starts.

FAQs