GAF Windows & Doors Nationwide

GAF Windows & Doors: The Pompano Beach Owner’s Guide

We stock and install GAF-compatible windows and doors throughout Pompano Beach, with most replacement projects running $4,500-$15,000 for window replacement and $8,000-$25,000 for impact window installation depending on series and count. Most standard sizes are available same-day through our distributor network; custom orders typically arrive within 5-7 business days. Homeowners usually discover a problem when the sash won’t stay open, they feel salt-air draft around the frame, or condensation appears between insulated glass panes after a Pompano Beach summer storm.

Call (754) 714-6540

Which GAF Models This Applies To

GAF’s window and door portfolio has shifted over the years, so identifying your exact series matters for part matching. The GAF MasterElite window line, common in South Florida builds from 2008-2016, used a proprietary sash balance system that differs from the later GAF WeatherStop entry door program introduced around 2017. Check the etched marking in the glass corner or the hinge-side label on doors; the model prefix (ME- for MasterElite, WS- for WeatherStop) tells us which hardware pack to bring.

We’ve learned the hard way that GAF MasterElite double-hungs from the 2010-2013 run used a 5/8-inch pivot bar width, while the 2014-2016 revision switched to 3/4-inch. Bring the wrong pivot bar and the sash won’t seat. For weatherstripping and sill caps, OEM GAF parts are still available through select distributors, though we often source quality aftermarket equivalents from Amesbury and Ultrafab that match the original compression specs at lower cost. The decision point is usually warranty: if your original GAF warranty is still active, OEM preserves coverage; if you’re past year 10, aftermarket saves 30-40% with equivalent performance.

Signs Your GAF Windows & Doors Is Failing

• Sash drops or won’t stay open. The coil balance assembly, which counterweights the sash with a constant-force spring, has fatigued. In Pompano Beach’s salt-air environment, we’ve seen these corrode internally in 8-12 years rather than the 15-20 year design life.
• Condensation between glass panes. The insulated glass unit (IGU) seal has failed, allowing humid Florida air to enter the airspace. Once the desiccant inside the spacer bar saturates, the clouding is permanent; the IGU needs replacement, not cleaning.
• Draft around the frame perimeter. Compression weatherstripping has hardened or the sill track has worn, creating gaps. On east-facing GAF units in Pompano Beach, UV exposure accelerates this; we check the pile height and fin orientation to match replacement.
• Difficulty latching or locking. The multipoint lock mechanism has misaligned due to frame settlement or the keepers have worn. For GAF WeatherStop doors, the deadbolt throw may bind if the door slab has absorbed moisture and swollen.
• Visible frame rot or delamination. Water intrusion at the sill nose or jamb leg, often from weep holes blocked by coastal debris. We document this with photos because it frequently indicates flashing failure behind the unit, not just the window itself.

Before

After

Replacement Cost & What’s Included

What drives the range: unit count, series tier (builder-grade vs. architectural), impact rating required for your Pompano Beach zone, and whether the original frame is reusable. Our quote is a flat written price with line-item breakdown - parts, labor, disposal, permit if required - before any work starts. Under Clause 1 of the Haven Standard, that number doesn’t shift unless you sign a change order. Every window and door installation carries our 365-Day Done Right Promise: if it’s not done right, we make it right. The documented photo record, included as standard, shows frame condition before and after so there’s no dispute about what was found.

DIY or Call Us?

There’s a clear line here. A homeowner can safely check whether weep holes are blocked or whether weatherstripping has visible gaps - that’s observation, not repair. But replacing an insulated glass unit or adjusting a multipoint lock requires proper shimming, torque sequencing, and often re-flashing to maintain the impact rating. In Pompano Beach, any window replacement in a high-velocity hurricane zone must meet Florida Building Code TAS 201, 202, or 203 criteria; an improper install voids insurance coverage and fails inspection. We’ve been called to redo DIY jobs where the owner saved $200 on labor and spent $1,800 correcting water intrusion. Measure twice, say it once, show your work - that’s how we approach it. Call (754) 714-6540 and we’ll give you a written price before anyone picks up a tool.

FAQs