Oldcastle Driveway & Pavers Nationwide

Oldcastle Driveway & Pavers: The Pompano Beach Owner’s Guide

We stock and install Oldcastle-compatible driveway and paver systems in Pompano Beach, with typical paver driveway installation running $7,000-$18,000 and driveway replacement from $5,000-$14,000 depending on substrate condition and paver series. Most Oldcastle paver repairs we handle in Pompano Beach are quoted same day and completed within a week. Homeowners usually discover the problem when they notice shifting or pooling after heavy rain, or when individual pavers start rocking underfoot - often the first sign that the bedding layer or edge restraints have failed beneath the surface.

Call (754) 714-6540

Which Oldcastle Models This Applies To

Oldcastle produces several paver and hardscape lines, and matching the right system matters for both structural compatibility and color consistency. In Pompano Beach, we most commonly service Oldcastle’s Belgard residential paver series - the Dublin Cobble, Catalina Slate, and Mega-Lafitt lines - along with their permeable Eco-Priora and commercial-grade Turfstone grids. The model identifier is usually stamped on the paver edge or found on the original purchase documentation; if you don’t have that, we measure the paver thickness (typically 60mm or 80mm for driveways), the edge profile, and the color blend code to source a match.

OEM Oldcastle pavers are manufactured to ASTM C936 standards for compressive strength and absorption, which matters in Florida’s wet-dry cycling. Aftermarket equivalents exist from Belgard distributors and Techo-Bloc, but we specify OEM when we’re extending an existing field - color lots vary between production runs, and a mismatch across your Pompano Beach driveway is visible from the curb. For full replacements, we’ll quote both options with the lot variance risk noted in writing.

Signs Your Oldcastle Driveway & Pavers Is Failing

• Individual pavers rock or sink when stepped on. This usually means the bedding sand has washed out or compacted unevenly, often from inadequate edge restraint or a failed geotextile layer beneath. The paver itself may be intact, but the structural base is no longer supporting it evenly.
• Standing water after rain that used to drain properly. In Pompano Beach’s flat coastal terrain, this points to settled base material or clogged permeable joints. Oldcastle permeable systems rely on a specific aggregate gradation in the joint - when that fills with sediment, the drainage path fails.
• Weeds or grass growing between pavers where polymeric sand was installed. The jointing material has degraded, typically from UV exposure or improper activation during original installation. Florida’s intense sun breaks down organic components in lower-grade joint sands faster than the product ratings suggest.
• Pavers shifting out of pattern or creating gaps at edges. Edge restraints - the plastic or concrete borders that lock the field in place - have cracked, heaved, or pulled away. This is common in Pompano Beach where sandy soils and seasonal saturation cycles stress rigid edging systems.
• Spalling or surface flaking on the paver face. This indicates a manufacturing defect or, more often, de-icing salt damage or pressure-washing too aggressively. Oldcastle’s denser pavers resist this, but lower-absorption blends in their value lines are more vulnerable in coastal environments.

Before

After

Replacement Cost & What’s Included

The range depends on three factors we assess on site: the condition of the existing base (whether we can reuse compacted aggregate or must excavate and rebuild), the paver series and color blend you select, and the complexity of the pattern - herringbone and basketweave consume more cuts and labor than running bond. Our quote includes removal and disposal of failed material, base preparation or repair, bedding layer installation, paver laying with edge restraints, joint sand or polymeric application, and compaction. Under Clause 1 of the Haven Standard, the price is written before anyone starts; no change proceeds without a signed change order. Every project carries our 365-Day Done Right Promise.

DIY or Call Us?

A homeowner can safely inspect what’s visible: lift a loose paver to check if bedding sand is present, look for cracked edge restraints, and photograph the paver stamp or color blend for matching. What you cannot assess without pulling material is the base condition - whether the compacted aggregate layer beneath the sand has settled, washed out, or lost its gradation. In Pompano Beach’s sandy soils, we’ve found base failures that looked like minor surface settling but revealed 4 inches of void beneath once we opened the field.

Rebuilding a paver base requires plate compaction, proper aggregate gradation (typically ASTM C2940 for base, ASTM C33 for bedding), and an understanding of how water moves through the assembly in our local flat terrain. Get the base wrong and the surface fails again in two seasons. We carry the compaction equipment, stock common Oldcastle blends, and document the base condition with photos before we quote - so you see what we found, not just what we said. Call (754) 714-6540 to schedule your free estimate.

FAQs