Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterUnilock Roofing: The Pompano Beach Owner’s Guide
Unilock roofing components installed in Pompano Beach typically run $400-$1,800 for repair and $8,000-$20,000 for full replacement, with most common part failures addressable same-day once we identify the exact series. Most Pompano Beach homeowners discover a Unilock roofing issue after a hard rain, when water stains appear on ceiling drywall, or when lifted shingles along the roof edge reveal cracked locking tabs that have been baking in the Florida sun for eight to twelve years. The salt air off the Atlantic accelerates the deterioration of the polymer-based locking mechanisms faster than inland Florida markets, which is why we stock Unilock-compatible hardware specifically rated for coastal exposure zones.
Which Unilock Models This Applies To
Unilock’s roofing line breaks into three series that matter for part matching: the original Unilock Slate-Look tiles (discontinued circa 2016 but still common in Pompano Beach’s 2005-2015 build stock), the Unilock Premium Composite Shingle line, and the commercial-grade Unilock Architectural series with reinforced nailing zones. The locking tab geometry differs between them - the Slate-Look used a double-channel interlock, while the Premium Composite shifted to a single-lap snap fit - and mixing hardware between series will leave gaps that channel water directly to the underlayment.
To identify your series, check the underside of a lifted shingle or tile for the molded stamp: “UL-SL” for Slate-Look, “UL-PC” for Premium Composite, or “UL-AR” for Architectural. If the stamp has weathered off, measure the locking tab width: Slate-Look tabs are 2.75 inches, Premium Composite 2.25 inches, Architectural 3.0 inches with a reinforced rib. We carry OEM Unilock replacement hardware and, where Unilock has discontinued a specific clip or tab, we source from Coastal Lock Systems, a Florida-based fabricator whose aftermarket parts match the original tensile specs and carry the same 110-mph wind rating.
Rowan Construction Group Pompano Beach is an independent service provider - not affiliated with Unilock - and we document every part source on your written quote so you know exactly what you’re getting.
Signs Your Unilock Roofing Is Failing
- Lifted or cupped shingle edges along the rake or eave. This usually means the locking tabs have cracked or the polymer has crystallized from UV exposure. In Pompano Beach, we see this accelerate after the seven-year mark because the salt film on the roof surface magnifies ultraviolet damage.
- Granule accumulation in gutters or downspout outlets. Unilock’s composite shingles shed granules as the asphalt binder degrades; heavy granule loss exposes the fiberglass mat beneath and voids the manufacturer’s weatherproofing warranty. We check this during every inspection and photograph the gutter contents for your record.
- Water stains on ceiling drywall that track to a specific roof plane. This points to a failed interlock rather than a puncture. The double-channel design of the Slate-Look series is particularly prone to channeling water sideways when one tab fails, so the interior damage often appears several feet from the actual breach.
- Shingles that slide out of position or feel loose underfoot during inspection. The nailing flange on early Unilock Premium Composite shingles was a thinner-gauge polymer that fatigues around fastener heads after repeated thermal cycling. Pompano Beach’s 90-degree temperature swings between January lows and August highs stress this flange more than manufacturers originally modeled.
- Moss or algae streaking concentrated in specific channels between shingles. This indicates standing water where the interlock has separated enough to create a capillary gap. The algae itself isn’t structural damage, but it confirms the lock failure that will become a leak during the next driving rain.
Before
AfterReplacement Cost & What’s Included
| Service | Price Range in Pompano Beach | What’s Included |
|---|---|---|
| Unilock roof repair (partial, locking hardware) | $400-$1,800 | Diagnosis, OEM or matched aftermarket parts, labor, disposal, photo documentation |
| Unilock roof replacement (full) | $8,000-$20,000 | Tear-off, deck inspection, underlayment, new Unilock-compatible system, permits, final inspection |
| Unilock metal roof installation | $15,000-$40,000 | Standing seam or tile-profile system, coastal-grade fasteners, full warranty |
What drives the range: accessibility (steep pitches or limited yard access for dumpster placement add labor hours), whether the original underlayment is salvageable, and whether we find deck rot when the old system comes off. We quote the full number before work starts, and if we find rot, we stop for a signed change order - no surprises, per Clause 1 of the Haven Standard. Every repair carries our 365-Day Done Right Promise; full replacements include the manufacturer’s warranty plus our workmanship guarantee.
DIY or Call Us?
There’s a safe middle ground and a hard stop. A homeowner can safely walk the perimeter with binoculars to spot lifted edges, check gutters for granule buildup, and photograph any suspicious areas for us to review - that helps, and we welcome it. What you should not do is climb the roof, pry up locked shingles to inspect tabs, or attempt to drive replacement fasteners. Unilock’s interlock system depends on precise engagement depth; overdrive a fastener and you compress the locking channel, creating a new leak. Underdrive it and the wind uplift rating drops to zero.
We’ve also seen homeowners order “compatible” hardware from national suppliers that turned out to be spec’d for Arizona dry heat, not Pompano Beach’s salt-laden humidity. The savings evaporate when the wrong polymer chalks out in eighteen months. If you’re seeing any of the symptoms above, call (754) 714-6540 and we’ll schedule a free estimate with a written price before anyone touches a tool.
FAQs
In Pompano Beach’s coastal climate, expect 8-12 years from the locking hardware and 15-20 years from the full shingle or tile assembly, assuming proper installation and no tree abrasion. The salt air and intense UV are harder on the polymer components than the asphalt or concrete body. Call (754) 714-6540 for an exact assessment of your roof’s condition - estimates are free.
No - once a Unilock locking tab has cracked or deformed, the interlock geometry is compromised and no adhesive or sealant restores the designed water channel. We replace the affected shingles or tiles with matched hardware. Call (754) 714-6540 for a written quote on the exact repair scope.
Most partial repairs finish in one working day; full replacements run 2-4 days depending on square footage and weather holds. We sequence crews tightly - Grant’s preference from years of managing subcontractors - so no one is standing around waiting. Call (754) 714-6540 to schedule.
We stock Unilock-compatible locking hardware, fasteners, and sealants rated for coastal exposure. For discontinued Slate-Look components, we pull from our Pompano Beach warehouse inventory or source from Coastal Lock Systems with a 24-48 hour turnaround. We confirm part availability when you call (754) 714-6540 and schedule your estimate.
Measure twice, say it once, show your work. That’s how we’ve handled 4,000-plus projects since 2007, every one with a written price before the first tool came out and a photo record when the crew left. If you’ve got a Unilock roof showing its age in Pompano Beach, call (754) 714-6540 for a free estimate. We’ll put the number in writing, scope the work line by line, and stand behind it with the 365-Day Done Right Promise.
Written by Grant Rowan, Owner, Rowan Construction Group Pompano Beach at Rowan Construction Group Pompano Beach, serving Pompano Beach and nearby areas.