Jerith Home Additions & ADU Nationwide

Jerith Home Additions & ADU: The Pompano Beach Owner’s Guide

Jerith aluminum fencing and ornamental metal components are commonly integrated into home additions and ADU projects throughout Pompano Beach, with typical installed pricing for Jerith-compatible work ranging from $45,000 to $130,000 depending on scope. We stock and install Jerith-compatible posts, panels, gates, and hardware for Pompano Beach homeowners, with same-day availability on standard fence sections when tied to an active addition or ADU build. Most owners discover a failing Jerith component when a gate sags, a panel loosens from its post, or coastal corrosion appears at the base of aluminum uprights after a storm season.

Call (754) 714-6540

Which Jerith Models This Applies To

Jerith’s residential line breaks into three series that we encounter regularly on Pompano Beach job sites: the Style 200 (1-inch square pickets, 2-rail), Style 300 (1-inch square pickets, 3-rail), and the heavier Style 400 (1.5-inch square pickets, 4-rail). The part you need depends on the rail count and picket dimension, which is stamped on the underside of the bottom rail on sections manufactured after 2018. Earlier Jerith sections carry a paper label inside the post cap that fades quickly in Florida humidity, so we measure rail height and picket width on-site when labels are gone.

Jerith posts are series-specific: the 200 uses a 2-inch square post, the 300 uses 2.5-inch, and the 400 requires 3-inch. A common compatibility gotcha in Pompano Beach is a homeowner ordering a Style 300 replacement panel for a Style 200 post, which leaves a visible gap and weakens the bracket connection. We source OEM Jerith brackets and rails through Jerith’s distributor network, though for gate hardware and self-closing hinges we often specify D&D Technologies or Locinox equivalents that outlast the OEM in salt-air conditions. The decision between OEM and aftermarket comes down to warranty alignment: Jerith’s 20-year residential finish warranty requires OEM components for claims, so we document what was used and where.

Signs Your Jerith Home Additions & ADU Is Failing

• Gate sag or misalignment. The Jerith gate frame is aluminum tube with internal corner brackets that loosen over time. In Pompano Beach, the expansion and contraction from afternoon sun on south-facing gates accelerates this; the gate drags or the latch misses by inches.
• White powder or pitting at post bases. This is galvanic corrosion where the aluminum post meets a steel anchor or concrete with high chloride content. Jerith’s powder coat holds up well, but any scratch at the base lets salt wick in, and Florida’s water table keeps that base damp year-round.
• Rattling panels in wind. The nylon or rubber grommets that isolate the picket from the rail degrade in UV. Jerith uses a press-fit grommet system that tightens with age until it cracks, then the picket clicks against the rail in a breeze.
• Bracket bolts backing out of masonry or wood. Jerith’s through-bolt installation into a concrete footer or wood frame relies on expansion anchors or lag bolts. The cyclic wet-dry of Pompano Beach’s summer storms works these loose; we find this most on ADU perimeter fences where the original contractor undersized the anchor.
• Fading or chalking of dark colors. Jerith’s darker powder coat colors, especially bronze and black, show UV degradation faster than white or green. After 8 to 12 years in direct Pompano Beach sun, the surface oxidizes to a dull film that wipes off on your hand.

Before

After

Replacement Cost & What’s Included

What drives the range: rail series, color match complexity, and footer condition. Jerith’s premium colors like textured bronze require factory ordering with a 3-week lead time; standard white or black we stock locally. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation; Jerith’s 20-year finish warranty covers the material, and we register it for you.

DIY or Call Us?

There’s safe checking, and then there’s work that needs a second set of hands and proper tools. A homeowner can verify the series by measuring picket width and rail count, and can tighten accessible gate hardware with a socket set. Where DIY goes wrong: Jerith panels are light but awkward, and a single person trying to hold a 6-foot section while aligning brackets risks dropping it on foot or hand. More critically, post replacement involves digging near utility lines and setting concrete to grade, which in Pompano Beach means accounting for the water table and using a proper base of crushed stone, not just a hole full of wet concrete. We carry post pullers, laser levels, and the right masonry bits on every truck. Call (754) 714-6540 to schedule your free estimate.

FAQs