Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Bathroom Remodeling: The Pompano Beach Owner’s Guide
ECO Window Systems bathroom remodeling in Pompano Beach typically runs $9,000-$28,000 for a full replacement, and we stock the compatible window units and hardware on our trucks for same-day measurement and next-day install in most cases. Most owners discover their ECO Window Systems units are failing when condensation appears between the glass layers of bathroom windows, the sashes won’t stay open against the humidity, or the coastal salt air has corroded the locking hardware. In Pompano Beach’s climate, the constant moisture cycling from hot showers against air-conditioned interiors accelerates seal failure faster than inland Florida markets.
Which ECO Window Systems Models This Applies To
ECO Window Systems produces several product lines common in South Florida construction from 2012 forward: the ECO 5000 Series single-hung vinyl windows, the ECO 7000 Series double-hung units, and the ECO Impact line rated for HVHZ (High Velocity Hurricane Zone) compliance. The label is stamped on the top of the sash or etched into the spacer bar between panes; you’ll need the series number, the nominal size in width-by-height, and whether it’s a tempered-glass unit (required within 24 inches of a tub or shower enclosure per Florida Building Code R308.4).
The 5000 Series uses a constant-force balance system that differs from the block-and-tackle assembly in the 7000 Series; swapping one for the other leaves the sash unsupported. We source OEM balances and tilt latches from ECO’s distribution network, though for hardware under constant salt-air exposure we often spec marine-grade stainless aftermarket equivalents that outlast the original zinc-coated components. Measure twice, say it once, show your work: we verify every dimension on-site before ordering, because ECO’s “standard” sizes have shifted slightly across production years and a quarter-inch mismatch means a reorder and a second trip.
Signs Your ECO Window Systems Bathroom Remodeling Is Failing

- Fog or moisture between glass panes means the insulated glass unit (IGU) seal has failed. The desiccant inside the spacer bar is saturated, and in Pompano Beach’s humidity that fogging becomes permanent staining within weeks as mineral deposits etch the interior glass surface.
- Sash drops or won’t stay raised indicates balance system failure, often from corrosion of the balance shoe or broken spring tension. In coastal bathrooms, the balance channel rusts from the inside out where you can’t see it until the sash falls.
- Locking hardware sticks or seizes happens when zinc die-cast components pit from salt-air exposure. The lock may feel gummy at first, then require two hands, then fail to engage entirely, leaving the window unsecured.
- Frame corners gap or weep holes clog shows vinyl expansion-contraction fatigue or accumulated soap scum and skin cells blocking drainage. Trapped water breeds mildew on the sill and can wick into the wall cavity.
- Exterior frame chalking or brittleness is UV degradation of the vinyl cap stock, accelerated by reflection from pool decks or light-colored walls common in Pompano Beach’s mid-century ranch stock. The frame becomes brittle and cracks under stress.
Before
AfterReplacement Cost & What’s Included
Full ECO Window Systems bathroom window replacement in Pompano Beach falls within our standard bathroom remodel range of $9,000-$28,000, with window-specific work typically landing in the lower third when it’s a standalone swap rather than part of a gut renovation. A single IGU replacement runs $400-$900 installed; full sash-and-frame replacement for a standard 36-by-48 unit runs $1,200-$2,400 depending on impact rating and whether the nailing fin needs cutting back for stucco repair.
Our written quote itemizes: the window unit, labor, permit and inspection fees (required for HVHZ-rated replacements), and any stucco or trim remediation. Under Clause 1 of the Haven Standard, that number is fixed before work starts; no change proceeds without a signed change order. The 365-Day Done Right Promise covers the installation and hardware. We pull permits and schedule inspections as standard, not as an upsell.
DIY or Call Us?

An owner can safely check the label location and photograph the frame condition for our review. What goes wrong fast: removing a sash without supporting the balance system lets the spring recoil into the frame cavity, and replacing an IGU without proper spacer desiccant handling traps moisture you’ll see again in thirty days. Impact-rated units require HVHZ installation certification for the permit; an unpermitted replacement voids insurance coverage after named-storm damage. The Florida Building Code section on tempered glass in wet locations is specific and unforgiving. If the unit is above a tub or shower, call (754) 714-6540; the risk of improper installation isn’t worth the savings.
FAQs
IGU seals typically last 10-15 years in coastal Broward County, though we’ve seen failures at 7 years in bathrooms with poor exhaust ventilation. Hardware in salt-air exposure often needs attention at 8-12 years. Call (754) 714-6540 for an exact quote on replacement - estimates are free.
Fogged IGUs cannot be de-fogged permanently; the seal breach is irreversible and the desiccant is spent. Individual glass panes can be cut, but without the factory seal and argon fill, condensation returns. We quote IGU replacement or full unit replacement based on frame condition. Call (754) 714-6540 for an exact quote - estimates are free.
A single sash-and-frame swap takes 3-4 hours on site, plus stucco or trim cure time if needed. Permitting adds 3-5 business days in Pompano Beach; we handle submission and inspection scheduling. Most projects complete within one week of signed approval. Call (754) 714-6540 to schedule your free estimate.
We stock common 5000 and 7000 Series balances, locks, and keepers on our Pompano Beach trucks, and we maintain next-day availability on IGUs and full units through our distribution partnership. HVHZ impact-rated units are ordered to spec after field measurement. Call (754) 714-6540 to confirm compatibility and schedule your free estimate.
Rowan Construction Group Pompano Beach is an independent service provider and is not affiliated with ECO Window Systems. We also stock parts and complete units for KraftMaid, Cambria, and Silestone installations.
Written by Grant Rowan, Owner, Rowan Construction Group Pompano Beach at Rowan Construction Group Pompano Beach, serving Pompano Beach and nearby areas.







Before
After
Before
After
Before
After