ES Windows Driveway & Pavers Nationwide

ES Windows Driveway & Pavers: The Pompano Beach Owner’s Guide

We stock and install ES Windows-compatible driveway and paver systems in Pompano Beach, with most replacement jobs running $7,000-$18,000 for paver driveway installation or $5,000-$14,000 for full driveway replacement depending on substrate condition and square footage. Most ES Windows paver components are available same-day through our network, and we carry common edge restraints, permeable joint sand, and paver base materials on our trucks. Homeowners usually discover the failure when they notice pooling water after rain, shifting pavers along the driveway edge, or weeds pushing through joints that were tight two seasons ago - all signs that the base or drainage layer beneath the ES Windows surface has compromised.

Call (754) 714-6540

Which ES Windows Models This Applies To

ES Windows manufactures several hardscape product lines, and the parts you need depend on whether your Pompano Beach installation used their porcelain paver system, concrete paver series, or natural stone overlay. Check the edge of any lifted paver for a stamped model code, or look for a project documentation card that the original installer should have left - ES Windows typically prints a series identifier like ESP-6000 or ESP-Porcelain on the underside of factory pavers.

The OEM edge restraint for ES porcelain systems is a PVC-based profile with a specific 3/16-inch anchoring tab spacing; generic big-box edge restraints look similar but use 1/4-inch spacing and will loosen within a season under the load of a standard SUV. We source the correct OEM profile or a vetted equivalent from Belgard and Techo-Bloc that matches the tab geometry exactly. If your original install used ES Windows permeable base panels, those are proprietary to the brand - aftermarket equivalents exist, but the interlock geometry differs by 2 millimeters, enough to create a soft spot that telegraphs through the finished surface in Broward County’s sandy, well-draining soil.

Signs Your ES Windows Driveway & Pavers Is Failing

• Pavers rock underfoot or sound hollow when tapped. This means the bedding sand layer has washed out or the base aggregate has settled unevenly, often because the original polymeric joint sand degraded faster than expected in Pompano Beach’s salt-air environment.
• Water pools in low spots instead of shedding toward the street. The slope plane has failed, either from base erosion or from tree root intrusion common in the older neighborhoods near Pompano Beach’s historic Old Town district where live oaks mature close to driveways.
• Weeds or grass sprout between joints that were previously sealed. The joint sand has decomposed to dust, which happens faster with ES Windows’ finer joint profiles if the original installer used standard sand instead of the specified polymeric compound.
• Edge pavers tilt outward or separate from the field. The edge restraint has cracked from UV exposure or pulled its spikes from the bedding layer - a failure mode we see often when the original crew used steel spikes instead of the longer, galvanized fasteners the Florida Building Code now requires within one mile of salt water.
• White efflorescence blooms across the paver surface after rain. This is mineral leaching from the base aggregate, not a paver defect, but it signals that moisture is moving upward through the assembly instead of draining laterally through the designed permeable layer.

Before

After

Replacement Cost & What’s Included

The range depends on three factors we assess on every Pompano Beach site: the condition of the existing substrate and whether it can be salvaged, the square footage and pattern complexity, and whether the original ES Windows install included a proper geotextile separation layer that we can reuse. Our quote is a flat written price with a written scope - under Clause 1 of the Haven Standard, you get the number before anyone picks up a tool. Every paver job carries our 365-Day Done Right Promise, and you receive a documented photo record of the substrate condition before we cover it.

DIY or Call Us?

There is no high-tension danger in paver work the way there is with garage door springs or electrical panels, but there is a point where DIY becomes expensive redo. A homeowner can safely pull a few pavers to inspect the base layer, measure joint width, or photograph the underside for model identification. What goes wrong is the compaction sequence: most rental plate compactors achieve 2,500-3,000 pounds per square foot, while the ES Windows specification calls for 4,000-plus on the base course and a separate, lighter pass on the bedding sand. Skip that step and the surface settles in six months. We have rebuilt three Pompano Beach driveways in the past two years where the owner did the demolition themselves, then called us when the new install showed waves after the first heavy rain. Measure twice, say it once, show your work - call (754) 714-6540 and we will quote the repair or full replacement with the number in writing.

FAQs