Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterES Windows Fence Installation: The Pompano Beach Owner’s Guide
ES Windows fence installation in Pompano Beach typically runs $3,500-$9,000 for a complete vinyl or aluminum system, with most residential jobs quoted and started within a week. We stock ES Windows-compatible posts, rails, and hardware for their Coastal Series and Impact-Rated lines, which are common across Broward County for their wind-load ratings. Most owners realize something’s wrong when panels start rattling in a northeast wind or when a post leans after one of Pompano Beach’s heavy summer rains saturates the footing.
Which ES Windows Models This Applies To
ES Windows organizes their fencing under two main umbrellas: the Coastal Series (vinyl privacy and semi-privacy panels rated for 110 mph wind loads) and the Impact-Rated aluminum line (engineered for HVHZ, High Velocity Hurricane Zone compliance). The Coastal Series uses a 5-inch square post with a routed pocket system; the aluminum line uses 2-inch by 3-inch rails with internal spline connections. The model number is stamped on a small foil label inside the bottom rail, usually facing the house side, and it starts with “ESC-” for vinyl or “ESI-” for aluminum.
We match OEM posts and rails where ES Windows still stocks them, but we’ve also vetted two aftermarket equivalents that meet the same wall thickness and UV-stabilization specs: Ply Gem’s Coastal line for vinyl, and Jerith’s #200 series for aluminum. The aftermarket route typically saves 15-20% on material without dropping below the 0.060-inch aluminum wall or the 0.150-inch vinyl wall that Florida’s salt air will eat through in under eight years if you go thinner. One compatibility gotcha: ES Windows changed their rail profile slightly in 2019, so a 2018 panel won’t lock cleanly into a 2020 post without a transition bracket we keep on the truck.
Signs Your ES Windows Fence Installation Is Failing
- Posts lean or wobble at the base. In Pompano Beach, the sandy loam along the Intracoastal drains fast but doesn’t hold a post footing the way clay would. Water gets in, migrates, and the concrete collar cracks; the post tilts, and the panel stress transfers to the rails.
- Rails pull out of the posts. The routed pocket in vinyl posts loosens over time as thermal cycling expands and contracts the plastic. In aluminum, the spline connection corrodes where the dissimilar metals meet if the factory isolator gasket has degraded.
- Panels rattle or buzz in moderate wind. This usually means the locking tabs on the pickets have broken or the bottom rail has bowed enough that the pickets no longer seat tightly. It’s an early warning; once the pickets start exiting the rail, the repair cost jumps.
- Discoloration or chalking on vinyl, or white corrosion on aluminum. Florida UV hits hard. ES Windows vinyl is capped with acrylic, but the cap wears through first on the south and west faces. Aluminum anodizing breaks down near salt spray; we see this accelerate within a mile of the beach.
- Gates sag or latch misaligns seasonally. The gate frame is a rectangle under diagonal stress; if the hinges have pulled or the post has settled even 3/8 inch, the latch won’t catch. In Pompano Beach’s wet season, this worsens as soil swells, then improves in dry months, which fools some owners into waiting.
Before
AfterReplacement Cost & What’s Included
| Scope | Price Range |
|---|---|
| Single post replacement (vinyl) | $350-$650 |
| Single post replacement (aluminum) | $400-$750 |
| Panel replacement (vinyl, 6 ft. section) | $600-$1,100 |
| Panel replacement (aluminum, 6 ft. section) | $700-$1,300 |
| Complete vinyl fence installation (typical 150 ft.) | $3,500-$9,000 |
| Complete aluminum fence installation (typical 150 ft.) | $4,000-$10,000 |
What drives the range: soil condition (rock or loose sand means different footing depth), access for equipment, and whether we’re matching existing color that’s faded. Our quote includes demolition and haul-away of the failed section, new post footings to 24-inch depth minimum per Broward County amended code, materials, labor, and a 365-Day Done Right Promise on the installation. Under Clause 1 of the Haven Standard, the price is written before anyone starts; no change proceeds without a signed change order. You’ll get a photo record of the footing depth, the post plumb, and the finished alignment before we leave.
DIY or Call Us?
There’s no high-tension danger in fence work the way there is with garage door springs, but there is a code compliance trap. Broward County requires a permit for any fence over 6 feet or any replacement that alters the line; Pompano Beach’s setback from the sidewalk varies by zoning district, and we’ve seen owners build a perfectly straight fence in the wrong place, then pay to move it. You can safely check: whether the post is loose in its footing (grab and shake), whether the rail is cracked (visual), and whether the model label is legible (flashlight and reading glasses). What goes wrong in DIY: post holes dug too shallow in sand, no gravel drainage layer so the footing floats, panels installed without expansion gaps so they buckle in August heat. If you’re past the inspection stage, call (754) 714-6540 and we’ll quote it flat.
FAQs
Vinyl typically holds 15-20 years if the cap layer stays intact; aluminum anodizing lasts 12-18 years near salt air before the white corrosion starts. The inland parts of Pompano Beach see the longer end of that range; properties east of Federal Highway, closer to the Atlantic salt spray, trend shorter. Call (754) 714-6540 for an exact quote on replacement - estimates are free.
Single posts, rails, or panels can be repaired or replaced if the original series is still in production or we have a verified aftermarket match. If the failure is systemic - multiple posts leaning, widespread chalking, or a series discontinued before 2015 - replacement is usually more economical than chasing individual repairs. We stock Coastal Series and Impact-Rated components on our Pompano Beach trucks for same-day replacement on common sizes.
A single post or panel replacement is typically a half-day job; a complete 150-foot residential installation runs 2-3 days, plus permit and inspection lead time. We sequence tightly - footing day, then install day - so nothing sits idle while concrete cures longer than it needs to. That’s a discipline Grant Rowan built into the crew schedule after too many jobs where subcontractors waited on each other.
We stock posts, rails, and hardware for the current Coastal Series and Impact-Rated lines on our Pompano Beach trucks. Discontinued series or custom colors typically order in 5-7 business days. We’ll tell you which category yours falls into when you call, not after we arrive. Measure twice, say it once, show your work.
Ready to get a written price? Call (754) 714-6540 to schedule your free estimate. We’ll review your ES Windows model, walk the fence line, and deliver a flat quote with scope and warranty in writing before any work starts. Free Second Opinion on any competitor’s written estimate - bring it and we’ll review it line by line at no charge.
Written by Grant Rowan, Owner, Rowan Construction Group Pompano Beach at Rowan Construction Group Pompano Beach, serving Pompano Beach and nearby areas.