Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Atlas Bathroom Remodeling: The Pompano Beach Owner’s Guide
Atlas bathroom remodeling in Pompano Beach typically runs $9,000-$28,000 for a full renovation, with most Atlas fixture and cabinetry replacements quoted and started within a week. We stock Atlas-compatible vanities, shower enclosures, and hardware lines, and we carry common replacement components on our trucks for Pompano Beach calls. Most homeowners realize something’s wrong when the vanity cabinet face starts separating at the joints, the soft-close drawers lose their glide, or the shower surround shows hairline cracks where the acrylic meets the tile flange.
Which Atlas Models This Applies To
Atlas produces three bathroom product tiers that we regularly encounter in Pompano Beach homes: the Essentials line (entry-level MDF-core vanities with thermofoil doors), the Pro Series (plywood-box construction with solid-surface tops), and the Designer Collection (framed cabinetry with dovetail drawers and quartz or granite options). The model number is stamped on a foil label inside the left door or drawer box, usually beginning with “ATV” for vanities or “ATS” for shower systems. The build date matters more than you’d think: Atlas switched from 1/2-inch to 5/8-inch plywood box construction in 2019, so a vanity base from 2018 won’t accept the same sink-mount hardware as a 2020 unit without adapter blocks. We source OEM Atlas parts through their regional distributor in Fort Lauderdale, though for discontinued lines we spec equivalent KraftMaid or Wellborn components that match the hinge boring and drawer-slide centers exactly. The KraftMaid option typically adds 10-15% to the materials line but extends the warranty from Atlas’s 5-year limited to a lifetime on drawer boxes and door hinges.
Signs Your Atlas Bathroom Remodeling Is Failing

- Thermofoil peeling at door edges. The heat-bonded vinyl skin separates when steam from daily showers attacks the adhesive, especially common in Pompano Beach’s humidity where bathroom exhaust fans run hard year-round. Once the seal breaks, moisture wicks into the MDF core and the door swells irreversibly.
- Soft-close drawers slamming or sticking. The Blum or Grass drawer slides Atlas uses are rated for 75,000 cycles, but salt air and humidity corrosion in coastal Pompano Beach homes can seize the hydraulic damper cylinder in half that time. The slide itself may be fine while the soft-close mechanism is shot.
- Shower surround cracks at wall seams. Atlas acrylic shower units expand and contract with hot water cycling; if the original installer didn’t leave the manufacturer’s specified 1/8-inch gap at corners, stress cracking appears first at the soap dish or grab bar mounting points.
- Vanity top staining or seam separation. Cultured marble tops in the Essentials line use a gel coat that wears through in 7-10 years of normal use; once breached, the calcium carbonate substrate absorbs hair dye, mouthwash, and cleaning chemicals permanently.
- Hardware finish flaking or turning green. Atlas’s standard chrome and brushed nickel hardware is plated zinc alloy, and in Pompano Beach’s salt-air environment the plating fails at the 6-8 year mark, starting at the lever bases where hands leave salt residue.
Before
AfterReplacement Cost & What’s Included
A full Atlas bathroom remodel in Pompano Beach runs $9,000-$28,000 depending on whether we’re replacing fixtures within existing footprints or moving plumbing and electrical. The mid-range sweet spot most Pompano Beach homeowners land on is $14,000-$18,000: that covers demolition, new Atlas or equivalent KraftMaid cabinetry, a solid-surface or quartz top, updated plumbing fixtures, tile or acrylic shower surround, flooring, paint, and trim. Here’s how the numbers break:
| Component | Typical Range |
|---|---|
| Atlas or equivalent vanity cabinet | $800-$2,500 |
| Countertop (quartz/solid surface) | $1,200-$3,500 |
| Shower enclosure or tub-surround | $1,500-$4,000 |
| Plumbing fixtures (faucet, shower valve, trim) | $600-$2,000 |
| Tile flooring and installation | $1,500-$4,500 |
| Labor (demo, rough carpentry, finish) | $4,000-$11,000 |
Under Clause 1 of the Haven Standard, every line item is written before work starts. No change proceeds without a signed change order. The 365-Day Done Right Promise covers the installation and workmanship; manufacturer warranties on Atlas, KraftMaid, or Cambria products run separately and we register them on your behalf.
DIY or Call Us?

There’s a clear line here. A homeowner with basic tools can swap an Atlas vanity faucet, replace a showerhead, or re-caulk a surround. What we see go wrong: homeowners who try to remove a glued-down cultured marble top and crack the cabinet box, or who disconnect a pressurized shower valve without shutting the main and flood the subfloor. The P-trap and supply stops under a Pompano Beach Atlas vanity are usually original to a 1980s-2000s slab home, and the chrome-plated brass valves seize solid; forcing them snaps the copper stub-out inside the wall. That’s a $400 emergency call instead of a scheduled replacement. We carry the proper valve wrenches, pipe freezing equipment if the main won’t hold, and the replacement parts to fix what breaks. Call (754) 714-6540 and we’ll walk through what’s actually involved before you start.
FAQs
A properly installed Atlas or equivalent bathroom should function for 15-20 years before major component replacement, though the thermofoil doors and hardware finishes in coastal humidity typically need attention at year 8-10. We spec marine-grade hardware and upgraded finishes on Pompano Beach jobs for exactly this reason. Call (754) 714-6540 for an exact quote - estimates are free.
Drawer slides, hinges, and faucet cartridges are replaceable; swollen MDF doors and cracked acrylic surrounds are not. We assess this on every call and will tell you straight if a $200 repair buys five more years or if you’re throwing money at a failing substrate. Call (754) 714-6540 for an exact quote - estimates are free.
A standard replacement within existing walls runs 5-7 working days; jobs involving plumbing relocation, wall movement, or custom tile work extend to 10-14 days. We sequence trades tightly - Grant’s crew has a reputation for keeping subcontractors from sitting idle waiting on each other - so the calendar time matches the actual labor time. Call (754) 714-6540 for an exact quote - estimates are free.
We carry common Atlas-compatible hardware, drawer slides, and faucet cartridges; full vanities and shower surrounds are ordered from Fort Lauderdale stock with 2-3 day lead time. For emergency situations - a cracked shower pan, a leaking valve behind a wall - we can install temporary solutions same-day while final components arrive. Call (754) 714-6540 for an exact quote - estimates are free.
Rowan Construction Group Pompano Beach is an independent service provider and is not affiliated with Atlas. We also stock and install parts for KraftMaid, Cambria, and Silestone product lines.
Ready to get a written price before anyone picks up a tool? Call (754) 714-6540 to schedule your free estimate. We’ll show up, document what we find with a photo record you keep, and put the number in writing - because that’s Clause 1, and it’s been the rule since 2007. Measure twice, say it once, show your work.
Written by Grant Rowan, Owner, Rowan Construction Group Pompano Beach at Rowan Construction Group Pompano Beach, serving Pompano Beach and nearby areas.







Before
After
Before
After
Before
After