KraftMaid Construction Service Nationwide

Why Pompano Beach Homeowners Choose KraftMaid Construction

Rowan Construction Group Pompano Beach provides independent KraftMaid construction service for cabinet installation, refacing, and kitchen remodeling throughout Broward County. We are not affiliated with or authorized by KraftMaid; we are an independent remodeler who has installed and serviced their cabinetry in Pompano Beach homes for years, and we stock the hardware, touch-up materials, and replacement components that actually fit their product lines. Call (754) 714-6540 to schedule your free estimate.

Call (754) 714-6540

KraftMaid’s semi-custom and frameless cabinets show up constantly in Pompano Beach’s renovation cycle, and we also handle KraftMaid Construction in Lighthouse Point, FL. The city’s 1950s-1970s CBS homes in neighborhoods like Collier Manor and Pompano Beach Highlands are being gut-renovated at a pace driven by CRA redevelopment pressure, and KraftMaid’s Vantage and Momentum lines are a common choice for owners who want factory-built precision without the price of full custom. We have worked on enough of these kitchens to know how the particleboard end panels behave when the AC goes out for a weekend in August, and how the soft-close hardware fatigues after a decade of salt-air humidity cycling through the house.

Our crew carries a documented photo record on every visit, included as standard. The price is written before anyone picks up a tool. That’s Clause 1 of the Haven Standard, and it applies to every KraftMaid job we touch.

Why Trust Rowan Construction Group Pompano Beach for Your KraftMaid Construction?

Grant Rowan trained in construction technology at Santa Monica College before spending nearly three decades in the field, and he has kept a worn copy of the Florida Building Code on his truck’s passenger seat ever since Rowan Construction Group started serving Pompano Beach in 2007. That code book gets opened on KraftMaid jobs more often than you might expect, because installing factory-built cabinets in a 1960s CBS block house with out-of-plumb walls and no square corners requires knowing exactly where the tolerances live.

We know KraftMaid’s product architecture cold. The Vantage line uses a 3/4-inch plywood box with furniture-board end panels; the Momentum line is frameless full-access with 3/4-inch melamine boxes and integrated I-beam construction; the Sanctuary line runs inset or overlay doors on a framed face-frame box. Each behaves differently when the wall behind it bows, or when the slab floor has settled half an inch toward the drain. Our technicians are background-checked, uniformed, and trained to spot the difference between a hinge adjustment and a box replacement before they unload the truck.

We use OEM-spec KraftMaid hinges, slides, and touch-up kits when the line is still supported. When OEM parts are discontinued or back-ordered, we source high-quality aftermarket soft-close hardware that matches the original mounting pattern and load rating. We do not guess. We measure twice, say it once, show our work.

The 365-Day Done Right Promise applies to every KraftMaid project: if it is not done right, we make it right. The terms are printed, not asterisked.

Common KraftMaid Construction Problems We Fix in Pompano Beach

• Humidity-related panel swelling and finish blistering on MDF/particleboard end panels. KraftMaid Vantage and some Momentum configurations use furniture-board or MDF end panels that absorb moisture when a Pompano Beach kitchen’s air conditioning fails during a summer storm, or when the house sits unoccupied with the HVAC off. The panel swells, the thermofoil or painted finish blisters at the edges, and the seam tape lifts. We see this most often on the sink-base and dishwasher-adjacent cabinets, where humidity spikes combine with minor plumbing condensation. We test the core with a moisture meter; if the particleboard is below 12 percent and structurally intact, we reface with matching door material. If the core has delaminated, replacement is the honest call.
• Soft-close drawer slides and hinges losing dampening, or cabinet doors sagging at the hinge plate. KraftMaid’s standard soft-close hinges and undermount drawer slides are rated for a specific cycle count, but Pompano Beach’s salt-air environment accelerates corrosion in the hydraulic dampening cartridges and the steel slide bodies. After eight to twelve years, the soft-close feature becomes a slow-close, then a no-close. The hinge plate itself can elongate its screw holes if the door weight exceeds spec, which happens when owners add pull-out spice racks or heavy storage accessories. We stock OEM-spec replacement hinges and slides, and we carry aftermarket heavy-duty upgrades for kitchens that have been accessorized beyond the original load calculation.
• Toe kicks and base panels wicking moisture from slab floors or dishwasher/ice-maker leaks. Pompano Beach’s older CBS homes often sit on slab foundations with no moisture barrier between the concrete and the finished floor. When a dishwasher drain line fails slowly, or an ice-maker supply line weeps behind the refrigerator, the toe-kick and base panel of a KraftMaid cabinet act like a wick. The melamine surface holds up longer than raw wood, but the edge banding and the joint between the toe-kick and the cabinet floor eventually fail. We pull the boxes, dry the slab with commercial dehumidification, and replace only the compromised components rather than selling a full kitchen tear-out when it is not warranted.
• Semi-custom boxes not perfectly square to Pompano Beach’s often out-of-plumb walls. KraftMaid builds its boxes to tight tolerances at the factory, but the walls in a 1965 Collier Manor ranch were never intended to receive frameless cabinetry. We regularly encounter walls that run 3/8 inch out of plumb over a ten-foot run, or corners that are closer to 91 degrees than 90. Installing KraftMaid Momentum or Vantage boxes against these walls without scribing, shimming, or structural adjustment produces uneven door reveals, rubbing at the hinge side, and stress fractures in the face-frame joints. Our crew carries a laser level and a full scribe kit on every KraftMaid install, and we document the wall conditions with photos before the first box goes in.
• Storage and accessory system failures in high-use coastal kitchens. KraftMaid’s roll-out trays, lazy Susans, and drawer divider systems are built for residential duty cycles, but Pompano Beach’s vacation-rental market and multi-generational households push some kitchens past that design intent. Corner-cabinet lazy Susan bearings corrode in the salt air; roll-out tray slides bend under loaded cast-iron cookware; wire drawer dividers fatigue and sag. We stock replacement components for the current Storage & Accessory catalog, and we can retrofit heavier-duty aftermarket hardware when the use case demands it.

Before

After

KraftMaid Parts & Our Repair-vs-Replace Approach

We do not automatically replace a KraftMaid kitchen because one cabinet failed. The decision follows a sequence: moisture-meter reading of the box core, structural inspection of the face frame and back panel, availability of matching door style and finish, and cost comparison against replacement with new compatible units.

OEM-spec KraftMaid hinges, slides, and touch-up kits are our first choice when the line is still supported. KraftMaid maintains parts availability for current and recently discontinued door styles, but some finishes from the early 2010s are gone. In those cases, we source high-quality aftermarket soft-close hardware from Blum and Salice that matches the original boring pattern and overlay specs, and we custom-match finishes with conversion varnish systems that hold up to South Florida’s UV and humidity exposure.

If the boxes are structurally sound after moisture testing, we reface and rehang. If swelling or delamination has reached the core, replacement is the honest call. We will show you the moisture-meter reading and the photo record, and we will put both in writing with the quote. Call (754) 714-6540 for a free assessment.

Our KraftMaid Service Process - Step by Step

1. 1
   Diagnosis with documentation. We arrive with a moisture meter, laser level, and camera. For repair calls, we identify the cabinet line, door style, finish code, and failure mode. For installs, we measure wall plumb, floor level, and utility rough-in locations against the KraftMaid shop drawings. Every finding is photographed and added to your project record before we leave.
2. 2
   Written quote with scope. Under Clause 1 of the Haven Standard, you receive a flat written price with line-item breakdown before any work starts. No “call for a quote” here. The scope specifies OEM or aftermarket parts, labor hours, and any structural remediation required for out-of-plumb walls or damaged substrate.
3. 3
   Repair or install with signed change order protection. If we find concealed damage, a water line behind the cabinets, or a wall condition that changes the scope, work stops until the change order is signed. This discipline is why Rowan Construction Group’s projects finish within a few percent of the agreed price across 4,000-plus jobs.
4. 4
   Testing and adjustment. Every door is checked for reveal consistency, soft-close function, and latch engagement. Drawer slides are loaded to rated capacity and cycled. On refacing jobs, we match the new finish to the existing under multiple light sources, because Pompano Beach’s afternoon sun through a west-facing kitchen window will tell you the truth about a color match that looked fine at 9 AM.
5. 5
   Warranty documentation. You leave with a written warranty, the photo record from every visit, and our 365-Day Done Right Promise in hand. The terms live on a page, not in a handshake.

KraftMaid Products We Service & Install in Pompano Beach

We work across KraftMaid’s residential product families:

• KraftMaid Vantage - semi-custom line with framed construction, plywood box, and extensive door-style catalog. Most common in Pompano Beach renovations where the owner wants factory consistency with some sizing flexibility.
• KraftMaid Momentum - frameless full-access line with 3/4-inch melamine box and integrated I-beam support. Popular for modern kitchen layouts and maximum interior volume.
• KraftMaid Sanctuary - premium inset and overlay doors on framed face-frame construction. Higher price point, tighter tolerances, more demanding installation requirements.
• KraftMaid Storage & Accessory system - roll-out trays, lazy Susans, drawer dividers, and organizational inserts. We service, replace, and retrofit these components.

We stock common Vantage and Momentum hardware locally for fast turnaround on repair calls, and we maintain relationships with regional distributors for special-order door styles and finishes.

We Also Service These Brands

Rowan Construction Group Pompano Beach sources across fifty-plus vetted brands, giving our written quotes honest numbers rather than inflated ones. In kitchens, that includes Cambria and Caesarstone countertops, Kohler and Toto fixtures, and Wellborn cabinetry alongside our KraftMaid work. We are not single-brand dependent, and we will recommend the product that fits your project rather than the one that fits our inventory.

FAQs - KraftMaid Construction Service in Pompano Beach

Is Rowan Construction Group Pompano Beach authorized by KraftMaid?

No. We are an independent KraftMaid service provider with no manufacturer authorization or affiliation. We have installed and repaired KraftMaid cabinetry in Pompano Beach for years, and we stock the parts and materials that fit their product lines, but we do not represent KraftMaid or their warranty program. Call (754) 714-6540 to discuss your project.

Can you match my discontinued KraftMaid door style and finish?

Sometimes. KraftMaid maintains parts for recently discontinued lines, but some door styles and finishes from the early 2010s are no longer available. When OEM matching is impossible, we custom-match with conversion varnish finishes that are formulated for South Florida’s UV and humidity exposure, and we show you a sample on your actual door material before proceeding. Call (754) 714-6540 and we will check availability against your finish code.

Will Pompano Beach humidity ruin my KraftMaid cabinets if we reface instead of replace?

Not if the substrate is sound and the moisture source is controlled. We test the particleboard or plywood core with a moisture meter before recommending refacing; readings below 12 percent indicate a stable substrate. We also identify and eliminate the moisture source, whether it is a plumbing leak, slab wicking, or an HVAC issue. Refacing a compromised box is false economy, and we will tell you when replacement is the honest choice. For a free moisture assessment, call (754) 714-6540.

Do you use KraftMaid original hardware or aftermarket?

OEM-spec KraftMaid hinges, slides, and touch-up kits are our first choice when the line is still supported. When OEM parts are discontinued or on extended backorder, we use high-quality aftermarket soft-close hardware from manufacturers like Blum and Salice that matches the original mounting pattern, load rating, and cycle count. We specify which you are getting in the written quote, with no substitution without approval.

Can you install a new KraftMaid kitchen if my walls are out of plumb?

Yes, but it requires preparation that some installers skip. We laser-measure every wall, identify plumb and level deviations, and build that correction into the installation plan with scribing, shimming, or furring as needed. KraftMaid’s tight factory tolerances demand this step; installing frameless Momentum boxes against a wall that runs 3/8 inch out over ten feet produces door rub and hinge stress that will fail within months. We document the wall conditions with photos before installation begins. Call (754) 714-6540 to schedule measurement.

How do you handle a KraftMaid cabinet damaged by a leak?

We pull the affected boxes, dry the surrounding structure with commercial dehumidification, and test the core with a moisture meter. If the particleboard or plywood core is below 12 percent moisture and structurally intact, we replace the compromised components, toe kick, and base panel, then reface to match. If delamination or swelling has reached the core, we replace with new KraftMaid-compatible units and integrate them into the existing layout. A Pompano Beach homeowner had a 12-year-old KraftMaid Vantage kitchen with sagging soft-close hinges and swollen base panels under the sink from a slow ice-maker leak. We also provide KraftMaid Construction in Lauderdale-by-the-Sea, FL. We pulled the affected boxes, replaced the compromised base cabinets with new KraftMaid Vantage-compatible units, reset the remaining doors with new hinges and slides, and topped it with a quartz counter and a tile backsplash tied into the existing layout. The result was a refreshed kitchen that matched the original door style without a full tear-out.

How much does KraftMaid construction cost in Pompano Beach?

These are flat written prices with scope defined before work starts, not estimates that shift. Your actual cost depends on cabinet line, door style, finish, accessory package, and any structural remediation required for wall or floor conditions. Call (754) 714-6540 for an exact quote - estimates are free.

Book Your KraftMaid Service in Pompano Beach, FL

Call (754) 714-6540 to schedule your free KraftMaid estimate. We will arrive with a moisture meter, laser level, and camera, deliver a flat written price before any work starts, and back the result with our 365-Day Done Right Promise. Every visit includes a documented photo record as standard. Bring a competitor’s written estimate and we will review it line by line at no charge.

Written by Grant Rowan, Owner at Rowan Construction Group Pompano Beach, serving Pompano Beach since 2007.