Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Impact Window Installation Cost in Pompano Beach?
Impact window installation in Pompano Beach, FL typically runs $8,000 to $25,000 for a whole-home project, with most single-family homes landing between $12,000 and $18,000 depending on window count, glass type, and frame material. That range covers labor, permit fees to the City of Pompano Beach Building Division, and disposal of your old windows. A single impact window replacement runs $600 to $1,800 installed, so larger homes with many openings reach the upper end quickly.
Impact Window Installation Cost Breakdown (2026)
Impact window pricing has four moving parts: the window unit itself, the labor to install it, the permit, and any structural work the opening needs before the window goes in. Here is how those line items typically look in the Pompano Beach market right now:
| Line Item | Typical Range (Pompano Beach, 2026) | Notes |
|---|---|---|
| Single-hung impact window (per unit, installed) | $600 - $1,100 | Most common in bedrooms and secondary rooms |
| Casement or awning impact window (per unit, installed) | $900 - $1,500 | Tighter seal; preferred on upper floors |
| Large picture or fixed impact window (per unit, installed) | $1,200 - $2,200 | Common in living rooms facing the Intracoastal or ocean views |
| Impact sliding glass door (per unit, installed) | $2,500 - $5,500 | Larger frame, heavier glass, more labor |
| Whole-home installation (8-12 windows, typical 1,800 sq ft home) | $8,000 - $15,000 | Includes permit, labor, and haul-away |
| Whole-home installation (larger home, 15-22 windows) | $15,000 - $25,000 | Multi-story or larger square footage; permit fees scale up |
| City of Pompano Beach building permit | $150 - $600 | Scales with project valuation; required for all impact window work |
| Buck framing or opening repair (per window) | $200 - $700 | Needed when existing rough opening is damaged or out of square |
| Stucco repair around new frame (per window) | $100 - $350 | Common on CBS (concrete block) construction throughout Pompano Beach |
The single biggest cost lever is glass specification. Florida Building Code Section 1609 requires impact glazing to meet specific design pressure (DP) ratings tied to Broward County’s wind speed maps. A window rated DP-50 costs noticeably less than one rated DP-70 or above, and homes east of US-1 – closer to the Intracoastal and the Atlantic – often require higher-rated units because of their exposure category. Most Pompano Beach homes we quote fall in the DP-50 to DP-60 range, which keeps units in the mid-tier pricing band. If a structural engineer has flagged your home for a higher rating, that spec drives the number up, and we put that reason in writing before any work starts.
Frame material is the second variable. Aluminum frames are the standard choice in coastal Broward County because they resist salt-air corrosion better than vinyl over a 10-to-15-year horizon. Vinyl is less expensive upfront – roughly 10 to 15 percent – but aluminum holds its finish and structural integrity longer in the Pompano Beach salt environment, which matters for long-term insurance credit calculations. We source frames from PGT Innovations and CGI (now part of Miter Brands), two manufacturers with Florida Product Approval numbers on file, which is a hard requirement for Broward County permit sign-off.
What Affects Impact Window Installation Pricing in Pompano Beach
- Distance from the coast and wind exposure category. Homes in the Pompano Beach Highlands or west of I-95 sit in a slightly lower wind exposure zone than properties on the barrier island or along the Intracoastal in areas like the Venetian Isles or Birch Park. A lower exposure category can allow a DP-50 rated unit where a waterfront home needs DP-65 or higher, and that difference shows up clearly in the per-window price.
- Window count and home size. Labor costs don’t scale linearly – a crew that mobilizes for 18 windows is more efficient per unit than one installing 4. Whole-home projects get a better per-window rate than spot replacements. A single-window swap in Collier City or Cypress Lakes will cost proportionally more per unit than a full replacement project across the street.
- Construction type: CBS versus frame. Most homes built in Pompano Beach after 1960 are concrete block (CBS) construction. Installing into a CBS opening requires a different anchor pattern than wood-frame construction, and the stucco around the new frame almost always needs patching. We price that stucco work as a line item so it doesn’t surface as a surprise after demo day.
- Second-story or high-access openings. Windows above the first floor require staging or a lift. In tighter neighborhoods like Bay View or near downtown Pompano Beach where lot lines are close, equipment access can add $150 to $400 per upper-floor window in labor.
- Glass tint and low-E coating. Florida’s solar heat gain coefficient (SHGC) requirements push most homeowners toward low-E glass anyway, but the specific tint level and coating type affect both price and your post-installation utility bill. A standard clear-laminated impact unit costs less than a high-performance low-E version, but the energy credit on your Broward County FPL bill over five years can close that gap.
- Insurance documentation requirements. Some Citizens Property Insurance and private carrier policies in Pompano Beach now require a Miami-Dade Notice of Acceptance (NOA) or a specific Florida Product Approval number to grant the wind mitigation discount. We pull that documentation and include it in your project file as a standard deliverable, not an add-on, because it’s the piece of paper your insurance agent actually needs.
Before
AfterWhat You Should Know About Pompano Beach Permits and Wind Mitigation
Every impact window installation in Pompano Beach requires a building permit from the City’s Development Services Department. That permit triggers an inspection – typically a rough-in inspection after the window is set but before any stucco or interior trim is closed, and a final inspection after everything is sealed. Skipping the permit is not a shortcut; it’s a lien on your property that surfaces at closing and voids your wind mitigation credit with your insurer. We pull the permit, we schedule the inspections, and we give you the final signed inspection card in the photo record we document on every job.
The wind mitigation credit is the financial case for impact windows in Pompano Beach. Broward County homeowners with verified impact glazing on all openings routinely see Citizens Property Insurance premium reductions of 25 to 45 percent, depending on their current policy structure. On a $4,000 annual premium, that’s $1,000 to $1,800 back per year. A $15,000 window project can pay back in insurance savings in eight to twelve years, before accounting for any reduction in cooling costs from the low-E glass.
After installation, your contractor should provide a completed Wind Mitigation Inspection Report (Citizens OIR-B1-1802 form) or documentation sufficient for your insurer’s inspector to complete one. That form is what triggers the discount. We include the Florida Product Approval numbers, installation photos, and permit documentation in your project file precisely because your insurance agent will ask for them.
Impact Windows vs. Hurricane Shutters: The Cost Comparison in Pompano Beach
Some homeowners compare impact window costs against accordion shutters or panel shutters. Accordion shutters for a whole home in Pompano Beach run $6,000 to $14,000 installed – lower upfront, but they require physical deployment before a storm, they do not provide any year-round noise or energy benefit, and most insurers offer a smaller wind mitigation credit for shutters than for permanent impact glazing. Panel shutters are even cheaper upfront ($3,000 to $8,000 for a full home) but need storage space and manual installation every time a storm threatens.
Impact windows cost more on day one. They also work on day one without any action from the homeowner, every single day. In a city where the Atlantic hurricane season runs June through November and Pompano Beach sits directly in the historical cone for South Florida storms, that always-on protection has a real value that doesn’t show up in the purchase price comparison.
How to Save on Impact Window Installation in Pompano Beach
The biggest savings opportunity is bundling. Replacing all windows at once – rather than doing a few now and a few later – lowers your per-window labor cost, requires only one permit fee, and means one mobilization for the crew. Homeowners in neighborhoods like Palm Aire or Collier Manor who try to phase the work over two or three years typically spend 15 to 25 percent more in total than they would have on a single project.
A few other practical levers:
- Time the project outside peak storm season. Demand for impact window installations spikes in Pompano Beach after named storms and during the May-June pre-season rush. Scheduling between December and February tends to get better contractor availability, which matters for scheduling and can affect lead time on unit delivery from manufacturers like PGT.
- Confirm your current window specifications before you shop. If any of your existing windows already meet Florida Building Code impact requirements (some homes built or remodeled post-2002 have compliant units), replacing them gains you little insurance credit and costs money you don’t need to spend. We check specs before we quote.
- Use your wind mitigation savings to offset financing costs. Some Pompano Beach homeowners use PACE financing (Property Assessed Clean Energy) through programs tied to Broward County. The immediate insurance reduction can offset a meaningful portion of the annual PACE assessment payment.
- Get a second opinion on any written estimate you already have. Rowan Construction Group offers a free second opinion on any competitor’s written estimate – we review it line by line at no charge and tell you whether the scope, unit specifications, and pricing are reasonable for the Pompano Beach market. Call (754) 714-6540 to set that up; it takes about 20 minutes and costs you nothing.
- Don’t over-specify where you don’t need to. A window on an interior courtyard or a west-facing wall away from the primary wind exposure doesn’t need the same DP rating as your oceanside openings. A contractor who specifies DP-70 units for every window regardless of location is either being conservative or hasn’t looked at your exposure map. The written quote should show the specified DP rating per unit, not just a total price.
If you’re planning a broader renovation – adding a home addition or converting a garage in Pompano Beach – bundling impact windows into that project scope is worth pricing. Permit activity is already open, the crew is already on site, and the coordination saves real money.
The Rowan Process: What Happens Before Anyone Picks Up a Tool
Under Clause 1 of the Haven Standard, the price is written before work starts. Every time. That means when you call us about impact window installation in Pompano Beach, you get a flat written price with a written scope – specific window count, unit model, DP rating per opening, permit included, stucco patching included as a line item, haul-away included – before we ask you to make any decision. “Call for a quote” is not how we operate; the quote comes to you.
No change to that scope proceeds without a signed change order. If we open a wall and find a damaged buck frame that wasn’t visible in the estimate walkthrough, we stop, document it with photographs, write the change, and get your signature before the additional work begins. That discipline – not enthusiasm, not tenure – is what has kept Rowan’s projects within a few percent of the agreed price across more than 4,000 jobs since 2007.
Every visit is documented with a photo record: before, during, and after. You receive that record when the crew leaves. It is a standard deliverable, not something you have to ask for, and it is the documentation your insurance agent and future buyers will want.
Crews are background-checked and uniformed. A live person answers calls 24/7. The 365-Day Done Right Promise means that if the work is not right, we make it right – and that promise is printed on every project page and backed by terms, not an asterisk.
If you’d like to see what a Rowan written scope looks like for your specific home in Pompano Beach, our Impact Window Installation in Pompano Beach service page explains the full process, and the team at our home page links to all seven trades we cover.
FAQs – Impact Window Installation Cost in Pompano Beach
How much does impact window installation cost in Pompano Beach, FL?
Impact window installation in Pompano Beach costs $8,000 to $25,000 for a whole-home project, with most single-family homes between $12,000 and $18,000. A single window installed runs $600 to $1,800 depending on size, frame material, and glass specification. The permit from the City of Pompano Beach adds $150 to $600 depending on project valuation. Call (754) 714-6540 for a written estimate with a flat price and itemized scope – there is no charge for the estimate.
How long does impact window installation take in Pompano Beach?
A whole-home installation of 10 to 15 windows in Pompano Beach typically takes two to three days of on-site work. Permit approval from the City’s Development Services Department adds five to fifteen business days before the crew can start, depending on current review volume. Material lead time from manufacturers like PGT runs two to six weeks depending on the unit specification and current production schedules. Budget six to eight weeks from signed contract to final inspection for a standard project.
Do impact windows reduce homeowner’s insurance in Pompano Beach?
Yes – verified impact glazing on all openings typically reduces Citizens Property Insurance and most private carrier premiums in Pompano Beach by 25 to 45 percent. On a $4,000 annual premium, that’s $1,000 to $1,800 per year. The reduction requires a completed Wind Mitigation Inspection Report (OIR-B1-1802 form) and supporting documentation including the Florida Product Approval number for your installed units. We include that documentation in your project file as a standard deliverable.
Is it worth installing impact windows in Pompano Beach, or should I use shutters instead?
Impact windows cost more upfront – $8,000 to $25,000 whole-home versus $6,000 to $14,000 for accordion shutters – but they provide continuous protection without any action required before a storm, and they deliver energy savings and noise reduction year-round. Most Pompano Beach insurers also grant a larger wind mitigation credit for permanent impact glazing than for shutters. For homes east of US-1 or anywhere with direct Atlantic or Intracoastal exposure, the all-in cost difference usually pays back within eight to twelve years through insurance savings alone.
Do I need a permit for impact window installation in Pompano Beach?
Yes, a building permit from the City of Pompano Beach is required for all impact window installations, including full replacements and individual window swaps. The permit costs $150 to $600 depending on project valuation and triggers a required inspection before final sign-off. Installing without a permit voids your wind mitigation credit with your insurer and can surface as a lien at closing. Rowan pulls the permit, schedules the inspections, and provides you with the final signed inspection card as part of the standard project documentation.
What impact window brands does Rowan Construction Group install in Pompano Beach?
We source primarily from PGT Innovations and CGI (Miter Brands) because both carry Florida Product Approval numbers required for Broward County permit sign-off, and both have a demonstrated track record in coastal salt-air environments like Pompano Beach. We name the specific unit and Florida Product Approval number in your written quote before any work starts, so you can verify the specification independently if you want to. We don’t substitute materials without a signed change order.
Can I finance impact window installation in Pompano Beach?
Yes. PACE financing (Property Assessed Clean Energy) programs are available in Broward County and allow homeowners to finance impact window projects through a property tax assessment rather than a traditional loan, with no money down in most cases. Some homeowners also use home equity lines. The annual insurance savings – $1,000 to $1,800 per year is common in Pompano Beach after a full impact window installation – can offset a significant portion of the annual financing cost. We don’t arrange financing directly, but we can provide the written scope and product documentation any lender or PACE program will ask for.
Key Takeaways
- Whole-home impact window installation in Pompano Beach runs $8,000 to $25,000, with most projects landing between $12,000 and $18,000.
- A single impact window installed costs $600 to $1,800; the permit adds $150 to $600 on top.
- Homes east of US-1 and along the Intracoastal typically need higher DP-rated units, which pushes per-window cost toward the upper range.
- Most Pompano Beach homeowners recover the cost difference over shutters through insurance savings in eight to twelve years.
- Every Rowan project gets a flat written price and written scope before work starts, a signed change order before any changes, and a photo record when the crew leaves – all standard, not upgrades.
- The 365-Day Done Right Promise applies to every impact window installation we complete in Pompano Beach.
- Grant Rowan has led this company since 2007, and over 4,000 projects later, the written price before work starts is still Clause 1.
Get a Written Price for Your Pompano Beach Impact Window Project
If you’re ready to see a flat written price with a full itemized scope for impact window installation at your Pompano Beach home, call (754) 714-6540. Grant Rowan and the Rowan Construction Group team will walk the property, pull the permit history, check your existing window specifications, and give you a written number – specific window count, unit model, DP rating per opening, stucco patching, haul-away, permit – before asking you to commit to anything. If you already have a competitor’s written estimate, bring it. The free second opinion is a standing offer: we review it line by line, at no charge, and tell you whether the scope and pricing match the Pompano Beach market.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Pompano Beach since 2007.
Pricing reflects the Pompano Beach market as of 2026. Rowan Construction Group Pompano Beach offers free estimates – call (754) 714-6540.
What Our Customers Say
"Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F."Solid work, decent crew, and the site was left tidy every evening."
- Pearl A."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T.