Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in Pompano Beach?
New window installation in Pompano Beach, FL typically runs $4,500 to $15,000 for standard replacement windows and $8,000 to $25,000 for impact-rated windows, depending on window count, frame material, and glass specification. Most Pompano Beach homeowners replacing six to eight windows land somewhere between $9,000 and $18,000 once labor, permits, and impact-rated glazing are factored in. Because Florida’s building code requires Miami-Dade or HVHZ (High-Velocity Hurricane Zone) product approval on most Broward County installs, the glass and hardware specs here cost more than the national average – and that’s before accounting for the salt-air exposure that makes frame material selection genuinely consequential.
New Window Installation Cost Breakdown (2026)
The table below reflects actual Pompano Beach market pricing as of 2026. These are installed costs – meaning permit, labor, frame disposal, and basic exterior sealing are included. Impact glass pricing assumes Miami-Dade NOA (Notice of Acceptance) certified units, which is the specification required in most of Broward County under Florida Building Code Chapter 16.
| Window Type / Scenario | Installed Cost Range (Pompano Beach) |
|---|---|
| Standard vinyl single-hung (per window) | $450 - $850 |
| Standard double-hung vinyl (per window) | $550 - $1,100 |
| Impact-rated single-hung (per window) | $900 - $1,800 |
| Impact-rated casement (per window) | $1,100 - $2,200 |
| Impact-rated picture window (large) | $1,400 - $3,500 |
| Whole-home replacement (6-8 windows, standard) | $4,500 - $9,500 |
| Whole-home replacement (6-8 windows, impact) | $9,000 - $16,000 |
| Whole-home replacement (10-14 windows, impact) | $14,000 - $25,000 |
| Permit (City of Pompano Beach building department) | $150 - $450 per project |
| Stucco repair / exterior resealing after install | $200 - $800 |
The biggest single cost variable in Pompano Beach is impact glass. Homeowners in neighborhoods like Lighthouse Point adjacent areas, the barrier island side of the Intracoastal, and older subdivisions near Atlantic Boulevard are frequently uninsured or underinsured against hurricane damage until they upgrade to HVHZ-rated units – and insurance carriers know it. Several Pompano Beach homeowners we’ve worked with received insurance premium reductions after a full impact window installation that offset roughly 18 to 30 months of the upgrade cost. That’s not a guarantee, but it’s a conversation worth having with your carrier before you decide standard glass is the budget play.
Frame material is the second major variable. Vinyl is the dominant choice in Pompano Beach – it handles salt air without corroding, doesn’t need painting, and carries a lower unit price. Aluminum frames cost more to purchase, expand and contract more aggressively in South Florida heat cycles, and can pit over time near the Intracoastal, but some historic and mid-century homes in areas like the McNab Road corridor or Cresthaven genuinely call for aluminum aesthetically. Fiberglass frames sit at the top of the price range but offer the best long-term dimensional stability in the coastal humidity that Pompano Beach gets from June through October.
What Affects New Window Installation Pricing in Pompano Beach
- Impact vs. standard glass specification: Miami-Dade NOA or HVHZ product approval is required in most Broward County installations under Florida Building Code Section 1609. Impact-rated laminated glass typically costs 60 to 100 percent more per unit than standard insulated glass – the laminated interlayer that keeps the pane intact under hurricane-force debris is the reason for that gap, not markup.
- Window count and project scale: Per-window labor cost drops as count goes up. A two-window bathroom job carries a higher per-unit labor rate than a twelve-window whole-home replacement, because mobilization, permitting, and setup are fixed costs spread across fewer openings. If you’re replacing four windows, budgeting for all eight at once usually lowers your per-window cost by $80 to $200.
- Opening condition and rough-in work: Older Pompano Beach homes – particularly CBS (concrete block and stucco) construction built in the 1960s and 1970s in neighborhoods like Collier City or Cresthaven – sometimes have deteriorated buck framing or corroded aluminum rough bucks around the window opening. Replacing those adds $150 to $400 per opening in labor and material before the new window goes in.
- Frame material – vinyl, aluminum, or fiberglass: Vinyl is the most cost-effective and handles South Florida’s salt-air environment without maintenance. Aluminum costs 15 to 25 percent more per unit and requires periodic inspection for corrosion on properties near the Intracoastal or within a mile of the beach. Fiberglass frames carry the highest unit cost but the best 20-year maintenance record in coastal climates.
- Permit and inspection requirements: The City of Pompano Beach building department requires a permit for window replacement when changing frame material or size, or when installing impact units. That permit triggers a building inspection, which is a good thing – it means the install is documented in the public record, which matters at resale. Budget $150 to $450 for the permit depending on project size.
- Second-floor or difficult-access openings: Pompano Beach has a meaningful stock of two-story single-family homes and townhomes, particularly in newer developments near Copans Road and the western side of the city. Second-floor installations require staging or lift equipment, adding $50 to $150 per opening in labor depending on site conditions.
Before
AfterHow to Save on New Window Installation in Pompano Beach
The most reliable way to reduce total cost without reducing quality is to do all openings at once. That sounds obvious, but the math is real: permitting, mobilization, and crew setup are fixed costs. Splitting a twelve-window job into two six-window visits because of budget timing will cost you a second permit fee, a second inspection visit, and a second mobilization charge – usually $600 to $1,200 more than doing it in a single project. If cash flow is the constraint, a written, phased scope with a signed price on each phase is the cleaner approach.
Choose the frame material that fits the site, not the one that looks cheapest on the quote line. A homeowner in the Hammondville area who installs aluminum frames a block from tidal water is going to spend money on corrosion remediation within eight to ten years. Vinyl in that location is a lower total cost of ownership even if the unit price looks similar. Rowan specifies this upfront in the written scope – the material recommendation is in writing before anything is ordered.
Get the insurance conversation done before you sign a contract. Some Pompano Beach homeowners qualify for Citizens Insurance credits or private carrier discounts when upgrading to Miami-Dade NOA certified impact windows. Your carrier needs the product approval numbers and the inspection certificate from the city to process that – both of which Rowan provides as part of the documented photo record and project file on every job. You don’t have to chase paperwork.
On a new window installation in Pompano Beach, the written price you receive from Rowan is flat – not a range, not a starting-at figure. Under Clause 1 of the Haven Standard, the price is in writing before anyone picks up a tool. If a competitor quote looks significantly lower, bring it in. Rowan offers a Free Second Opinion on any written estimate – we’ll review it line by line at no charge and tell you exactly what’s included, what’s missing, and what the real installed cost is likely to be. Call (754) 714-6540 to schedule that review or to get your written estimate.
One more practical note: window installation in Pompano Beach is genuinely year-round work, but scheduling in the January through March window (before the summer build season ramps up) tends to produce shorter lead times on product delivery from manufacturers like PGT and CGI, which both have Florida distribution and are common specifications for impact glass in Broward County. Summer installs are absolutely fine, but product lead times can stretch two to four weeks longer during peak hurricane-prep season.
FAQs – New Window Installation Cost in Pompano Beach
How much does impact window installation cost in Pompano Beach?
Impact window installation in Pompano Beach runs $8,000 to $25,000 for a typical whole-home project, with most six- to ten-window jobs landing between $9,000 and $16,000 installed. Per-window cost ranges from $900 for a standard single-hung impact unit to $3,500 or more for a large picture window with laminated impact glass. The Miami-Dade NOA certification required under Florida Building Code for Broward County installations is included in those figures – this is not an add-on, it’s the baseline specification. For an exact written price on your home’s specific openings, call (754) 714-6540 – estimates are free and the price is flat before any work starts.
Do I need a permit to replace windows in Pompano Beach?
Yes, in most cases. The City of Pompano Beach requires a building permit when you’re changing window frame material, changing opening size, or installing impact-rated units. The permit runs $150 to $450 depending on project scope and triggers a city inspection – which means the installation is documented in the public record and your impact glass gets the certificate your insurance carrier will ask for. Rowan pulls the permit on your behalf and coordinates the inspection as a standard part of every project, not a separate service fee.
How long does window installation take in Pompano Beach?
Most whole-home window replacements in Pompano Beach are completed in one to two days of on-site installation once product is on hand. A six- to eight-window project on a single-story CBS home typically runs a full day; larger or two-story projects run one and a half to two days. Product lead time from order to delivery for PGT or CGI impact units is typically two to four weeks in normal market conditions, longer in summer. The permit inspection is scheduled after installation and usually happens within three to seven business days of the request.
Is it cheaper to replace all windows at once or do them in stages?
Replacing all windows at once is almost always cheaper per window than staging the project. A twelve-window job done in two six-window phases typically costs $600 to $1,200 more total due to duplicate permit fees, inspection fees, and mobilization charges. If budget is the constraint, the better approach is a written phased scope with a locked price on each phase – that way you’re not paying twice for fixed costs, and you know the exact price of Phase 2 before Phase 1 starts. That’s how Rowan structures phased projects under the Haven Standard.
What window brands does Rowan install in Pompano Beach?
Rowan works with a range of manufacturers whose products carry Miami-Dade NOA certification and meet Florida Building Code HVHZ requirements. Common specifications in Pompano Beach projects include PGT Innovations and CGI Windows and Doors, both of which have Florida-based manufacturing and established local distribution, which reduces lead times compared to out-of-state brands. Frame material – vinyl, aluminum, or fiberglass – is selected based on the site’s proximity to tidal water, the home’s existing aesthetic, and the client’s maintenance preferences. Every product specified in a Rowan quote is named by brand and model number in the written scope, not described generically.
Can I get a written price for window installation before committing?
Yes – and at Rowan, a written price before any work starts is not optional, it’s how every project works. Under Clause 1 of the Haven Standard, you receive a flat written price with a written scope and a written warranty before a single measurement tape goes on a window. There’s no “call for a quote” process here; the number is on paper. Rowan also offers a Free Second Opinion on any written estimate you’ve already received – bring a competitor’s quote and we’ll review it line by line at no charge. Call (754) 714-6540 to get started.
Key Takeaways
- Standard window replacement in Pompano Beach runs $4,500 to $15,000 installed; impact-rated window installation runs $8,000 to $25,000 for most whole-home projects.
- Florida Building Code requires Miami-Dade NOA or HVHZ product approval for most Broward County installations – budget for impact-rated glass as the baseline specification, not an upgrade.
- Vinyl frames are the practical choice for most Pompano Beach locations; aluminum and fiberglass are appropriate in specific aesthetic or structural situations but require clear-eyed cost-of-ownership thinking in a coastal salt-air environment.
- Permits run $150 to $450 through the City of Pompano Beach building department and are required in most replacement projects – they also produce the inspection certificate your insurance carrier will want for any premium adjustment.
- Every Rowan project starts with a flat written price and written scope; no change proceeds without a signed change order, which is why projects finish within a few percent of the agreed number.
- Rowan’s 365-Day Done Right Promise and Free Second Opinion on any written estimate are standing offers – no asterisk, no expiration date.
Get a Written Price for Your Pompano Beach Window Installation
Rowan Construction Group has been delivering written prices before work starts since 2007 – across 4,000-plus projects and every trade from windows and doors to full home additions. If you’re planning a window replacement or new installation in Pompano Beach, the estimate is free, the price is flat, and the scope is in writing before anyone shows up at your door. Grant Rowan and the Rowan team operate under The Haven Standard, which means the number you agree to is the number you pay – documented photo record included, no handshake required.
Call (754) 714-6540 to schedule your free written estimate. If you have a competitor’s quote already, bring it – the Free Second Opinion review is at no charge, and we’ll tell you exactly what you’re looking at line by line. You can also learn more about the full scope of what we do across Rowan Construction Group’s services before you call.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Pompano Beach, FL since 2007.
Pricing reflects the Pompano Beach market as of 2026. Rowan Construction Group Pompano Beach offers free estimates – call (754) 714-6540.
What Our Customers Say
"Good communication throughout. Weekly written update meant I never had to chase them."
- Nadine G."Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.