Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterHow Much Does Shower Replacement Cost in Pompano Beach?
Shower replacement in Pompano Beach, FL typically costs between $3,000 and $8,500 in 2026, depending on the size of the enclosure, the tile or panel system you choose, and whether the existing substrate needs to come out before new work can start. Most Pompano Beach homeowners land somewhere in the $4,000-$6,500 range for a standard 3×3 or 3×4 alcove shower with a mid-grade tile package and a Kohler or Delta valve and trim. If the scope is larger – a walk-in conversion, custom glass, or full waterproofing system rebuild – costs climb toward the upper end.
Shower Replacement Cost Breakdown (2026)
Shower replacement in Pompano Beach, FL costs $3,000-$8,500 in 2026. Here is how that number typically splits across labor and materials:
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Demolition and haul-away | $300-$700 | Higher if cement board or old mortar bed is involved |
| Waterproofing membrane | $400-$900 | Schluter Kerdi or similar sheet membrane; budget systems run less |
| Cement board or backer | $150-$400 | Only if substrate replacement is needed |
| Tile – walls (material only) | $400-$1,800 | Large-format porcelain runs $3-$8/sq ft; designer tile $10-$20+ |
| Tile – floor or shower pan | $200-$600 | Mosaic or small-format tile for slip resistance |
| Tile labor (set, grout, seal) | $800-$2,000 | Pompano Beach tile labor runs $8-$14/sq ft installed |
| Valve, trim, and fixtures | $250-$900 | Kohler Devonshire or Moen Gibson in this range |
| Glass enclosure or door | $500-$1,800 | Frameless glass adds $800-$1,800; framed or curtain rod is less |
| Niche, bench, or built-in | $200-$700 | Tiled niche is standard; floating bench adds more |
| Drain and rough plumbing | $300-$900 | Higher if drain location moves or riser is corroded |
The single biggest swing factor in Pompano Beach projects is what is found behind the existing tile. South Florida’s humidity and the area’s older plumbing stock – many homes in neighborhoods like Cypress Bend and Cresthaven were built in the 1960s and 1970s – mean moisture damage and corroded cast-iron drains are common discoveries. When demo reveals a compromised substrate, the waterproofing scope expands and so does the cost. That is not a surprise on a Rowan Construction Group project; under Clause 1 of the Haven Standard, a written price is delivered before any work begins, and any change in scope requires a signed change order before the crew proceeds. The final number stays within a few percent of what the customer agreed to.
For context, a full Shower Replacement in Pompano Beach at the mid-range – new Schluter waterproofing membrane, 12×24 porcelain wall tile, small-format floor tile, Kohler pressure-balance valve, and a semi-frameless glass door – runs most Pompano Beach homeowners $4,800-$6,200 installed, with everything included in the written quote before work starts.
What Affects Shower Replacement Pricing in Pompano Beach
- Substrate condition behind the existing tile. In Pompano Beach’s older stock – think the ranch-style homes east of Federal Highway and the post-war builds in Collier City – water has often been working behind the tile for years before the homeowner notices. Replacing a deteriorated mortar bed or damaged cement board adds $400-$900 to the job. We photograph the substrate before anything goes back up, so you see exactly what was found.
- Shower size and configuration. A standard 36×36 alcove shower is the lowest-cost footprint. A 36×48 or larger walk-in, or a corner unit that requires two glass panels, bumps both tile labor and the glass enclosure cost meaningfully. Tub-to-shower conversions in Pompano Beach run $3,500-$10,000 because the drain typically has to move and the curb or floor slope has to be rebuilt from scratch.
- Tile selection. Porcelain is the workhorse in South Florida because it holds up to humidity and requires minimal maintenance – a 12×24 or 18×36 slab-look tile in the $3-$6 per square foot range is what most Pompano Beach projects use. Natural stone (travertine, marble) costs more in material and more in labor because it requires a different setting bed and sealer schedule.
- Valve and plumbing complexity. If the existing rough-in is in reasonable shape and the valve location stays put, plumbing adds a predictable $300-$600 to the project. If the supply lines are galvanized – common in pre-1985 Pompano Beach homes – replacing them to the valve adds cost and is worth doing while the wall is open.
- Glass enclosure type. A curtain rod is the least expensive option. A framed sliding door runs $500-$900 installed. Frameless hinged glass – what most buyers of this guide are considering – adds $900-$1,800 to the project and requires precise tile layout to look right, which is a labor factor as well as a materials one.
- Permit requirements. Broward County requires a permit for plumbing work that modifies the drain location or supply lines. Rowan pulls permits when required; it is factored into the written quote, not added later. Skipping a required permit to save $150-$300 creates a title problem when the home sells – an issue that comes up frequently in Pompano Beach’s active resale market.
Before
AfterHow to Save on Shower Replacement
Choose Porcelain Over Natural Stone
In Pompano Beach’s climate – high humidity year-round and salt air within a few miles of the coast – porcelain tile outperforms natural stone in durability and requires far less sealing maintenance. It also costs less: a quality 12×24 porcelain runs $2-$5 per square foot versus $6-$15 for marble or travertine. The look is similar; the upkeep is not. For most Pompano Beach bathrooms, porcelain is the better material decision, not just the cheaper one.
Keep the Drain Where It Is
Moving a drain in a slab-on-grade home – which describes most of Pompano Beach’s residential stock – requires concrete cutting, which adds $600-$1,200 to the job. If the existing drain location works with your new shower footprint, keeping it there is the single most effective way to reduce cost without giving up anything visible.
Replace the Valve, Not the Rough-In
Unless the supply lines are galvanized or visibly corroded, the rough-in plumbing can often stay. Replacing just the valve cartridge and trim to a new Moen or Kohler unit – rather than rerouting supply lines – saves $300-$600 and still gives you a new, properly functioning valve with a manufacturer warranty.
Time the Project Around Material Lead Times
Large-format porcelain slabs and frameless glass panels are the two items most likely to have a lead time in the current market. Selecting in-stock tile from a local distributor in Pompano Beach or Deerfield Beach rather than a special-order format trims 1-2 weeks off the schedule and occasionally trims material cost as well. Our sourcing network covers 50-plus vetted brands, so we can tell you what is on the shelf before you fall in love with something on backorder.
Get a Second Opinion Before You Sign
Rowan Construction Group offers a free line-by-line review of any written estimate you’ve already received. Bring the quote; we’ll compare scope, materials, and exclusions at no charge. Scope exclusions – waterproofing, backer board, permit fees – are where low quotes become expensive surprises. Call (754) 714-6540 to schedule a free second opinion or a free estimate on your Pompano Beach shower replacement.
Don’t Cut the Waterproofing
This one saves money in the wrong direction. Skipping a proper membrane system (Schluter Kerdi, Laticrete Hydro Ban, or equivalent) to save $300-$500 is the most common reason shower replacements fail within 3-5 years. In Pompano Beach’s humidity, a failed shower pan or wall membrane migrates moisture into the framing faster than it would in a drier climate. The remediation cost is $4,000-$12,000. The membrane is not optional on a Rowan project.
FAQs – Shower Replacement Cost in Pompano Beach
How much does shower replacement cost in Pompano Beach in 2026?
Shower replacement in Pompano Beach costs $3,000-$8,500 in 2026, with most projects landing between $4,000 and $6,500 for a standard alcove or walk-in shower with mid-grade tile and a semi-frameless glass door. The lower end of the range applies to smaller enclosures with a prefab pan and basic fixtures. The upper end applies to larger footprints, designer tile, frameless glass, or projects where demo reveals a damaged substrate that has to be rebuilt before new tile can go on. Call (754) 714-6540 for a written estimate on your specific bathroom – the quote is free and includes a flat price with a written scope before any work starts.
Is it cheaper to repair or replace a shower in Pompano Beach?
Repair costs $400-$1,800 for isolated issues like a cracked pan, a failed grout joint, or a leaking valve – but those repairs only make sense when the tile and substrate are otherwise sound. In Pompano Beach’s older housing stock, a shower that is leaking at the pan or showing efflorescence (white mineral staining) on the grout often has moisture behind the tile that a surface repair won’t fix. We photograph the substrate at demo so the decision is based on evidence, not guesswork. When substrate damage is present, replacement is almost always the better investment because a patched system in this climate fails again within 2-4 years. Call (754) 714-6540 and we’ll give you a straight answer on what your shower actually needs.
How long does shower replacement take in Pompano Beach?
A standard shower replacement in Pompano Beach takes 4-7 business days from demo to final grout seal, assuming materials are on hand and no significant substrate damage is found. Tile curing and grout sealing require dry time that can’t be rushed – typically 24-48 hours between coats – so the schedule is partly a function of chemistry, not just crew speed. If a permit is required (drain relocation, supply line work), Broward County’s review timeline adds a few days. We give you a written schedule alongside the written price before the project starts.
Can a shower replacement affect my home’s resale value in Pompano Beach?
Yes, and the Pompano Beach market is specific about what buyers respond to. Homes in Cypress Bend, Palm Aire, and the neighborhoods east of US-1 are selling to buyers who inspect bathrooms closely. A shower with fresh tile, a frameless or semi-frameless glass enclosure, and a functioning pressure-balance valve reads as move-in ready and supports asking price. Realtor data for Broward County consistently shows that updated primary bathrooms return 60-70% of the remodel cost in resale value – not a dollar-for-dollar return, but a meaningful one in a market where buyer expectations have risen. A dated or failing shower, by contrast, shows up in inspection reports and becomes a negotiation point.
Does Rowan Construction Group pull permits for shower replacement in Pompano Beach?
Rowan pulls permits when Broward County requires them – specifically when the scope includes drain relocation, supply line modification, or structural changes to the shower footprint. Permit fees are factored into the written quote before work begins; they don’t appear as a surprise line item after the fact. For a straight tile-and-waterproofing replacement where the plumbing rough-in stays in place, a permit is typically not required. We’ll confirm the permit requirement for your specific scope in the estimate. Call (754) 714-6540 to get that conversation started.
Pompano Beach Shower Replacement: What to Expect From the Process
For homeowners who haven’t been through a shower replacement before, a quick picture of what the actual sequence looks like helps set expectations – and helps you evaluate any quote you receive.
Step 1: Written Estimate Before Anything Moves
The first step is a site visit. Grant Rowan or a project estimator walks the bathroom, photographs the existing shower, measures the footprint, and reviews the condition of the access panel or adjacent wall for plumbing access. You get a flat written price with a written scope – materials specified by brand and format, labor included, permit fees factored in if applicable. Under Clause 1 of the Haven Standard, no work starts without that signed document. On a Rowan project, “call for a quote” is not how this works.
Step 2: Demo and Substrate Assessment
Demo day is when the real story of the existing shower comes out. The tile comes off, the backer or mortar bed comes out, and the substrate and drain are photographed before anything else happens. If the framing is sound and the drain is in usable condition, the project proceeds on the original scope and price. If moisture damage is found, a written change order describing the additional scope and additional cost is presented before the crew proceeds. The photo record from demo is included in your project documentation – standard on every Rowan visit, not an upgrade.
Step 3: Waterproofing
New cement board or Schluter Kerdi board goes up, and the membrane system is installed across the floor, up the walls to the height specified in the scope, and into the niche if there is one. In Pompano Beach, waterproofing is not a place to economize. The tile you see is cosmetic; the membrane system behind it is structural to the longevity of the installation. We use Schluter and Laticrete systems because they are tested, warranted by the manufacturer, and appropriate for South Florida’s humidity profile.
Step 4: Tile Setting and Grouting
Tile is set with a polymer-modified thinset appropriate for the tile format – large-format porcelain requires a different coverage spec than small mosaic – and layout lines are established before the first tile goes up so the pattern lands correctly at the focal points (eye level on the back wall, centered on the niche). Grout joints are filled, cured, and sealed. Floor tile gets an anti-slip finish appropriate for a wet environment. The valve trim and fixtures go on after tile is complete.
Step 5: Glass and Final Fixtures
Glass panels and doors are templated after tile is complete because real-world dimensions differ from plan dimensions by enough to matter. Frameless glass is fabricated to the actual opening, not a nominal size. Final fixture installation – showerhead, hand shower if in scope, grab bars if specified – follows glass installation. The crew does a final walkthrough with you before closing out the job.
Comparing Shower Replacement to Related Bathroom Projects in Pompano Beach
Shower replacement is often part of a larger bathroom conversation. Here is how the costs compare to related scopes in the Pompano Beach market so you can think about what makes sense to do at the same time:
- Full bathroom remodel: $9,000-$28,000 – includes shower, vanity, toilet, floor tile, and all fixtures. Doing shower and vanity at the same time saves mobilization cost versus two separate projects.
- Small bathroom remodel: $5,000-$12,000 – typically a guest bath or hall bath with a tub/shower combo, single vanity, and floor tile.
- Walk-in shower installation: $4,500-$12,000 – overlaps with shower replacement at the upper end when the footprint is large or the glass package is custom.
- Tub-to-shower conversion: $3,500-$10,000 – adding to a tub recess where the drain has to move is the scope that most commonly approaches the top of that range in Pompano Beach.
- Bathroom vanity installation only: $800-$3,000 – a natural add-on when the shower scope has the bathroom torn apart anyway.
If you’re considering any of these alongside shower replacement, doing them in a single project typically saves 10-15% compared to mobilizing separately – because demo, protection, and haul-away are shared costs.
Why Pompano Beach’s Climate Changes the Math on Shower Replacement
This is the local detail that most national pricing guides miss entirely. Pompano Beach sits about a mile from the Atlantic on average, and the combination of salt air, year-round humidity, and summer rainfall patterns creates a moisture load on residential bathrooms that inland markets don’t see at the same intensity. Specifically:
Grout joints in older Pompano Beach showers fail faster than the 10-15 year window you’ll read about in national guides. In homes near the Intracoastal – Lighthouse Point border area, Palm Aire, and the barrier island – we regularly see grout failure at 6-8 years in showers that weren’t properly waterproofed or sealed on installation. By the time the grout fails visibly, water has usually been migrating behind the tile for 1-2 years.
Cast-iron drain pipes, which are common in pre-1980 Pompano Beach homes, corrode from the outside in this environment. A shower that drains fine today can have a drain collar that is structurally compromised. Photographing and inspecting the drain at demo is a standard part of every Rowan shower replacement – because a failed drain discovered after new tile is set is an expensive problem.
Ventilation matters more here than almost anywhere else. A bathroom exhaust fan that is undersized or venting into the attic instead of outside accelerates grout failure and mold growth regardless of how good the waterproofing membrane is. We note ventilation condition in every project’s photo record and flag it in writing if it’s a problem – because a perfect shower in a bathroom with inadequate ventilation still fails prematurely in Pompano Beach’s climate.
Key Takeaways
- Shower replacement in Pompano Beach costs $3,000-$8,500 in 2026, with most projects between $4,000 and $6,500.
- The biggest cost variable is substrate condition – common in Pompano Beach’s older housing stock to find moisture damage behind the tile.
- Porcelain tile and a proper waterproofing membrane (Schluter Kerdi, Laticrete Hydro Ban) are the right material decisions for South Florida’s humidity, not optional upgrades.
- Moving a drain in a slab-on-grade home adds $600-$1,200; keeping it in place is the most effective single cost savings.
- Rowan Construction Group provides a written price before any work starts – no surprises, no change without a signed change order.
- The 365-Day Done Right Promise covers every shower replacement: if it’s not right, Rowan makes it right.
- The free estimate and free second opinion on any written estimate are standing offers – call (754) 714-6540.
Get a Written Price on Your Pompano Beach Shower Replacement
If your shower is past its useful life or you’re planning a bathroom update in Pompano Beach, the next step is a written estimate – a flat price with a written scope, a specified material list, and a warranty, before anyone picks up a tool. Grant Rowan and the team have delivered 4,000-plus projects this way since 2007, and the process is the same on a $3,500 shower replacement as it is on a full home addition.
Bring a competitor’s quote if you have one. The free second opinion is a standing offer – we’ll go through it line by line and tell you what the scope covers and what it doesn’t. No charge, no obligation.
To schedule a free estimate for shower replacement in Pompano Beach, call (754) 714-6540. A live person answers. You can also visit our home page to learn more about Rowan Construction Group and the full scope of residential services we offer across Broward County.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Pompano Beach since 2007.
Pricing reflects the Pompano Beach market as of 2026. Rowan Construction Group Pompano Beach offers free estimates – call (754) 714-6540.
What Our Customers Say
"Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L.